If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
It seem to be based on a pulse-counting FM principle.
Fun part is that the same functionality is possible using plain old transistors. Pulse counting is a superb principle when there is ample signal to demodulate, which is the very case in demodulating a free running oscillator.
I built this a long time ago when I first saw it posted on a Pic site.
The code works,but the sensitivity is not good for even a pinpointer.
John
(I think I posted a reference to this some time ago,don't waste your time)
Comment