Announcement

Collapse
No announcement yet.

Please, I want to help build a simple metal detector

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Funfinder
    replied
    @ kt315
    What the hell are you doing in Egypt? Digging tunnels below pyramids?
    And as long as you don't go to special areas, hunting at sun-beaches is childs-play.
    You can hunt for tourist-souveniers there while other tourists are watching you.
    Next time tell the security you go to the disco and instead you go to the next archaeological site at night!

    Siberia and also the region where you life is useless for treasurehunt in wintertime - only if you work in mines or with excavators.
    There is winter-perma-frost-ground right now.

    If you wanna help here in this thread why you don't send Hammerhead a ready to go PCB with all components so he just has
    to add some stuff like coil, speaker, switch, LED etc.? Declare it as radio-repair-part or whatever.



    @ Hammerhead
    Well, at the moment it is also "relative" cold at Alexandria. This is the northern air from the mediterranean sea.
    Without warm Sahara winds the temperature can go down. Actual internet info: Alexandria: 5° to 20° celsius.

    We don't wanna get you into trouble but you might buy some already ready to go PCB-metal detector board.
    Or you check out old broken electronic devices for needed parts.
    I would try to built some already waterproofed metal detector when you like to dive anyway.
    If you have some connections you can drive to Cairo and order some metal detector from Turkey -
    this is the closest country. Or you can get one from the egypt military (demining-detector).
    But maybe this only works for you with really good connections and enough bakshish.


    Do you know that you are a very luck person, Hammerhead, because you are living in a land full of old treasure
    where you can search for them the whole year long. No frustrating winter-pause.
    Thank you for the offer, directly at the moment it is not possible for me to visit Alexandria
    but I hope its possible sometimes, because the winter all over Europe is just terrible and a waste of time.

    Leave a comment:


  • 6666
    replied
    Thanks Q, I should have been a little clearer, I am guessing that the pcb was done in sprint layout, if so would you have the .lay file for it thanks.

    Leave a comment:


  • Qiaozhi
    replied
    Originally posted by 6666 View Post
    Q do you have all the files for that pcb ? I would like to check something thanks.
    I think this is the schematic that goes with the PCB layout.
    Attached Files

    Leave a comment:


  • 6666
    replied
    Originally posted by Qiaozhi View Post
    Why don't you build either Surf-PI, Baracuda, or Minipulse Plus?
    Any of these will work if built on stripboard -> https://en.wikipedia.org/wiki/Stripboard
    Then you don't need a PCB.

    If you can make PCBs yourself, then here's a single-sided version of the Surf-PI ->
    Q do you have all the files for that pcb ? I would like to check something thanks.

    Leave a comment:


  • kt315
    replied
    Originally posted by Hammerhead View Post
    Welcome your in Alexandria anytime I want I love the Turkish people and thanks to feel good in helping me to make METAL DETECTOR I just want a photo pcb and the image of the list of ingredients electronic device fit to work in the beaches and I think that this semi-prohibited devices in Egypt once again thank you for how you feel good my friend Ahmed
    metal detectors hunting is fully restricted in Egypt and generally in all countries of Magrib. thus sometimes i write in
    a declaration 'printed board'. you see - no there a word 'electronics'. also, people write 'a receiver'.
    that is working )

    Leave a comment:


  • Hammerhead
    replied
    Originally posted by Hammerhead View Post
    Hello all of you in this link found on almost everything from the circle Barracuda problem lies in the capacitor 6n8j250 does not have a in Egypt, and I'll keep my attempt until Create METAL DETECTOR myself
    I'm sorry this is the link and I hope to comment http://romaniagoldrecovery.blogspot....es-casero.html

    Leave a comment:


  • Hammerhead
    replied
    Originally posted by Qiaozhi View Post
    In that case, how are you ever going to build it, even if you have an image of the PCB layout?
    Hello all of you in this link found on almost everything from the circle Barracuda problem lies in the capacitor 6n8j250 does not have a in Egypt, and I'll keep my attempt until Create METAL DETECTOR myself

    Leave a comment:


  • ODM
    replied
    Highly recommended to build a kit, instead of trying to find parts and trying to make a board yourself.
    -Kit is built and tested, pcb flaws are minimal
    -Easier to debug when instructions are followed step by step
    -The components are known to be OK

    Leave a comment:


  • Qiaozhi
    replied
    Originally posted by Hammerhead View Post
    Mister qiaoshi thank the problem we have in Egypt that some of the pieces do not exist in electronic Alakatronyat market such as transistors mpsa13
    In that case, how are you ever going to build it, even if you have an image of the PCB layout?

    Leave a comment:


  • Hammerhead
    replied
    Mister qiaoshi thank the problem we have in Egypt that some of the pieces do not exist in electronic Alakatronyat market such as transistors mpsa13

    Leave a comment:


  • Qiaozhi
    replied
    Originally posted by Hammerhead View Post
    Welcome your in Alexandria anytime I want I love the Turkish people and thanks to feel good in helping me to make METAL DETECTOR I just want a photo pcb and the image of the list of ingredients electronic device fit to work in the beaches and I think that this semi-prohibited devices in Egypt once again thank you for how you feel good my friend Ahmed
    Why don't you build either Surf-PI, Baracuda, or Minipulse Plus?
    Any of these will work if built on stripboard -> https://en.wikipedia.org/wiki/Stripboard
    Then you don't need a PCB.

    If you can make PCBs yourself, then here's a single-sided version of the Surf-PI ->
    Attached Files

    Leave a comment:


  • Hammerhead
    replied
    F. How do these people live in this snow this very difficult thing Mr. kt315

    Leave a comment:


  • Hammerhead
    replied
    Welcome your in Alexandria anytime I want I love the Turkish people and thanks to feel good in helping me to make METAL DETECTOR I just want a photo pcb and the image of the list of ingredients electronic device fit to work in the beaches and I think that this semi-prohibited devices in Egypt once again thank you for how you feel good my friend Ahmed

    Leave a comment:


  • Hammerhead
    replied
    Lord we are in Egypt get used to the warm atmosphere never seen before this cold atmosphere

    Leave a comment:


  • Hammerhead
    replied
    Mister kt315 you to marvel there with us in Cairo branch of the company Manlab and the device have a price $ 3500 means 28,000 thousand Egyptian pounds and this amount so huge we have and possible police custody of the device remain Expire lost your money and your freedom in order that I want to make a device manual so as not to lose my money and my freedom difficult atmosphere now in Egypt

    Leave a comment:

Working...
X