FORTUNE-M3/M2 PCB for sale ??

[reptooyep]

Hi,
I'm looking for a FORTUNE M3/M2 PCB with or without PIC.
I've already sent a mail to [email protected] without success.
I can't find it on ebay.
Thanks

[kt315]

here http://www.md4u.ru/viewtopic.php?f=31&t=9771

[reptooyep]

Thanks kt315,
For those who have a bad translator as google, the mail for ordering is [email protected]

[star]

[reptooyep]

Hi,
Ozzypcb has no more fortune pcb. I still don't have answer from md4.mopra...
Anyone has a seller in his contact list ?

[kt315]

https://reibert.info/threads/fortuna-m-2.836684/

[kt315]

http://alltech.at.ua/forum/10-153-1

[kt315]

http://alltech.at.ua/forum/3

[reptooyep]

OK, i can only find complete units, i want to do it myself with a professional board.
I'll etch my own one..

[kt315]

direct hit http://alltech.at.ua/forum/10-197-1
do not see his email address... not registered on the site...

[eclipse]

The author takes only WMZ payment so if you can't pay him with this currency you won't be able to buy the board.
I'm nearly finished my M3, just need to make the coil. Payment was a nightmare! PayPal to WMZ is hard as hell.

[Koala]

Which is the authors website ?

What is the difference between

M
M2
M2 ultra
M3
Pro


https://www.youtube.com/watch?v=QdwQdPalnu4
https://www.youtube.com/watch?v=nFDM5PA51UA
https://www.youtube.com/watch?v=5wFsI2Wf4pA


11" on the smallest coin is much more than my home built detectors can do in air. Wonder how it preforms on the ground ?

[eclipse]

M2 ultra -> I think this is Ozzy's mod
M2 -> available hex so you can build it yourself
M3 -> programmed chips are available from the author, hex is not available like M2
Pro is the newest version that includes OLED display, instead of the regular type, again like M3 programmed chips are available, hex is not available

http://alltech.at.ua is the author's website

[Koala]

M2 ultra -> I think this is Ozzy's mod
M2 -> available hex so you can build it yourself
M3 -> programmed chips are available from the author, hex is not available like M2
Pro is the newest version that includes OLED display, instead of the regular type, again like M3 programmed chips are available, hex is not available

http://alltech.at.ua is the author's website

Thanks for the information. Some meanings get lost in translation.

[vlambers]

There are boards Forum Pro for sale
http://www.golden-mask.com.ua/index....product_id=182

Boards Fortuna PRO version with FM modulator.


On sale boards for assembling metal detector Fortuna PRO FM
Features:


Under the housing GAINTA G1910
stabilizers to choose from: either LD1117S50 or LM2940IMP-5.0
protection against reverse polarity of supply with a minimum drop in voltage
headphone plug is installed on the board
Built-in FM transmitter
Works with p.o. Version 1.0.2
Schema, list of parts, front panel drilling on Google Drive https://drive.google.com/open?id=0B2...V9yWFFSY25TQkE



The boards are tested, no errors


Boards Fortuna PRO version with FM modulator.


The buttons are placed on a separate board, which is placed either with the help of collet connectors or soldered on the "comb" racks, for the convenience of adjusting the buttons for the height of the front panel.


The FM antenna is located on the button board, if desired, you can use your own, having sealed on the main board.


It is possible to shield the coil connector from one side, input amplifiers, and filters on both sides of the board.


The display is recommended not to solder, but to put on the connectors, greatly facilitates the setting and access.


Schema, list of parts, front panel drilling on Google Drive https://drive.google.com/open?id=0B2...V9yWFFSY25TQkE