Original Surf P.I.

[kt315]

you are surfprojectkiller LOL!

[ionut_mtb]

sorry i do not need in the schematics. i have 4 Gigabites archive with that and more than that.
NO INFO outside i need.
with your pcb back i send you a pcb or on delta pulse, either King Cobra, either Barracuda. on your choice.
you will get your pcb tested and resoldered back.

not interested in this kind of deal, sorry.

[kt315]

sorry i do not need in the schematics. i have 4 Gigabites archive with that and more than that.
NO INFO outside i need.
with your pcb back i send you a pcb or on delta pulse, either King Cobra, either Barracuda. on your choice.
you will get your pcb tested and resoldered back.

[ionut_mtb]

its OK. i need the board (layout). can you desolder it and share both side scanned? also Part List.

Yours

I don't have time for such a thing. Part list you can take it from this schematic, is exactly the same.

[kt315]

its OK. i need the board (layout). can you desolder it and share both side scanned? also Part List.

Yours

[ionut_mtb]

can you send me the board for desoldering and give to people new project?

The detector is fully functional KT. And there is a schematic on the forum with it.

[kt315]

can you send me the board for desoldering and give to people new project?

[ionut_mtb]

- disconnect the coil and measure R on a board coil socket
- write us the value
schematic clearly shows - dumping R is on the board.

How about a few side view pictures, so we can verify some of the resistor values?.

I found the dumping resistor, is 220ohm but looks like is only 0.5w. why?

[chemelec]

How about a few side view pictures, so we can verify some of the resistor values?.

[kt315]

- disconnect the coil and measure R on a board coil socket
- write us the value
schematic clearly shows - dumping R is on the board.

[ionut_mtb]

Hello,

I have some questions regarding this detector.
- where is dumping resistor for the coil? It does not seem to be inside the shrink tube. Coil inductance (pulse diver 950) measure 0.224mh (hi reading) and 292uh(low)- which one is the real value? (i don't have multimeter with me to check the resistance).
- can i use instead of 8AA battery's 3x18650? what it will be the drawback?
- i have the black o-ring for the case, i've heard that is notorious for leakage. Where can i get the orange one in Eu.
- what minus have in front of surf P.I pro?

Thank you!