IDX Pro VR3 alignment

[Tony60]

Hello everyone, I'm going to finalize IDX pro wonder how to behave for the correct alignment of the VR3 trimmer. I'm in possession of an oscilloscope if needed.
Thank you all and good targets.
Tony60.

[Nandor]

Ciao

VR3 is the trimmer for Disc. Turn Disc potentiometer to maximum and turn VR3 until you can discriminate a coke can pulltab!

[Tony60]

Hi Naidor,
Thank very much for info.
All the best.
Ciao Tony60.