Is anyone here able to give a diagram of the Minelab Musketeer?

[kt315]

With all due respect to you, this is not the answer. )))
---
guys, USE ADVANCED SEARCH ENGINE OF THE FORUM. DO NOT RELOAD US BY YOUR BLANK REQUESTS.

https://www.geotech1.com/forums/showthread.php?22538-Questions-about-the-search-engine-in-this-forum

[sbalio1]

enney pcb for this detector ???????????

[fx3]

[QUOTE = ivconic; 280496] Если я правильно помню; мы сделали все это еще в 2010 году.
Это здесь, на форуме, полная документация, многочисленные четкие фотографии каждой части, схемы, несколько версий печатных плат и т. д.
Все это есть здесь, на форуме. Вам нужно только использовать опцию поиска.
Бессмысленно повторять один и тот же материал, разбросанный по десяткам страниц и сделанный в прошлом.
Что связано с Minelab Relic Hawk; также относится и к мушкетеру.
Очень небольшие различия между этими двумя моделями.
Насколько я помню, наиболее точный реверс-инжиниринг был выполнен мной и Ultimate Haze, мы сделали это вместе
и опубликовали всю возможную информацию, которая вам когда-либо понадобится.
Просто воспользуйтесь функцией поиска и читайте темы. [/ QUOTE]

With all due respect to you, this is not the answer. ))) You had the Musketeer device on the table in front of you, and could not describe these two important areas in the diagram. I have studied all the topics and mentions related to the Musketeer. In some diagrams it is indicated that this is a choke, and in others it is a transformer. And in the photo there is a transformer board. It is unclear neither the direction of the turns (if it is a tap from the midpoint), nor the way of connecting the speaker to it (if it is a transformer). The secondary winding hangs in the air according to the scheme.
They cannot be identical devices. A Relic is a Relic and a Musketeer is a Musketeer. If they were identical, you would not say in other topics "I was too lazy to draw." When there is something to draw, there are differences. For what purpose was the device disassembled, and photos were exhibited, if there is no PRINCIPAL diagram. Bad job. Useless.

[ivconic]

Thank. I am interested in 2 sections of the circuit - filter block (switch), and a transformer. Do you accidentally have a photo of these areas, and the paths near them?

If i recall correctly; we did it all back in 2010.
It is here on forum, complete documentation, numerous clear photos of each part, schematic, several pcb versions etc.
You have it all here on forum. You only need to use search option.
It is pointless to repeat same stuff scattered on tens of pages and done in the past.
What's related to Minelab Relic Hawk; also applies to Musketeer too.
Very small differences between those two models.
Most accurate reverse engineering, as i recall, was done by Ultimate Haze and me, we did that together,
And we posted all the possible info you'll ever need.
Just use search option and read the topics.

[fx3]

....

[ATTACH]53159[/ATTACH]

Thank. I am interested in 2 sections of the circuit - filter block (switch), and a transformer. Do you accidentally have a photo of these areas, and the paths near them?

[kt315]

....

[fx3]

Is anyone here able to give a diagram of the Minelab Musketeer?
Amateur radio forums are the most irresponsible. Schemes are scattered throughout the forum, not ordered, and half of them are uploaded to photo exchangers that no longer exist.
Who has the Minelab Musketeer circuit?