Announcement

Collapse
No announcement yet.

Xtrem Hunter

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Skippy
    replied
    Maybe it should be CM?
    Perhaps it is 95mm , square. That is 95mm x 95mm , maybe a flat plate.

    Leave a comment:


  • Altra
    replied
    Originally posted by Orbit View Post

    Greetings​ Altra !
    Greetings to you also!

    Leave a comment:


  • Orbit
    replied
    Originally posted by Altra View Post

    Good point. Maybe it should be CM?
    Greetings​ Altra !

    Leave a comment:


  • Altra
    replied
    Originally posted by Skippy View Post
    Detecting a 10mm x 10mm ( 100 mm2 ) object at 3 metres ?
    Good point. Maybe it should be CM?

    Leave a comment:


  • ivconic
    replied
    Originally posted by moodz View Post
    .. so I am not sure if Russia has a patent system but they sure like putting out detailed technical papers on new technologies.

    I found a 2021 paper from
    Department of Mechatronics and Automation, South Ural State University, 454080 Chelyabinsk, Russia​

    Its a "new" type of sensing system that gives very deep detection with discrimination.

    Here is a result from the paper .. The depth achieved is quite impressive at 3.5 meters with 25% chance of error. ( discrim and depth/size indication )

    It would seem like a good candidate for hoard detection.

    What is even more interesting is that I already have the electronics for this system. I will let you know some results shortly.

    Click image for larger version

Name:	detector1.jpg
Views:	393
Size:	52.2 KB
ID:	414848
    This confirms everything I heard and recounted here about "Korshun".

    Leave a comment:


  • Orbit
    replied
    The constructor of this device claims that this Russian Pi detector is an older military model detector with the same good depth. I have not personally tested it, I just found this, so take a look.​

    Metal Detector - Fau Pulse designed for ground-search. Metal detectors with LCD, graphical representation of the signal level and condition of the battery.

    Leave a comment:


  • Orbit
    replied
    Originally posted by Carl-NC View Post

    Says it's PI using half-sine pulses. I don't understand why the coils are spaced apart; with both of them horizontal, the maximum depth is achieved when the coils are concentric.
    Yes, I agree about the configuration of the coils​! The only reason is easier carrying while working with the device.​

    Leave a comment:


  • Skippy
    replied
    Detecting a 10mm x 10mm ( 100 mm2 ) object at 3 metres ?

    Leave a comment:


  • moodz
    replied
    .. so I am not sure if Russia has a patent system but they sure like putting out detailed technical papers on new technologies.

    I found a 2021 paper from
    Department of Mechatronics and Automation, South Ural State University, 454080 Chelyabinsk, Russia​

    Its a "new" type of sensing system that gives very deep detection with discrimination.

    Here is a result from the paper .. The depth achieved is quite impressive at 3.5 meters with 25% chance of error. ( discrim and depth/size indication )

    It would seem like a good candidate for hoard detection.

    What is even more interesting is that I already have the electronics for this system. I will let you know some results shortly.

    Click image for larger version

Name:	detector1.jpg
Views:	393
Size:	52.2 KB
ID:	414848

    Leave a comment:


  • Riss
    replied
    Thanks Ivconic, but there's nothing personal between us .Orbit tried to create a virtual reality…
    On the subject : there are many requirements for the detector to be effective in searching for hoards
    - insensitivity to small surface targets - coin detectors are dropped out, except those with probes greater than 60 cm

    Leave a comment:


  • ivconic
    replied
    Guys... I'm turning 57 in a few days and I'm really tired of similar discussions on the forums.
    If you have something unresolved between you; work it out in person, p2p.
    Life is too short to waste on unimportant things.
    Look at the world we live in!
    There are so many more serious problems in the world to think about.
    And you waste time, energy and forum space on such irrelevant nonsense.
    Forgive me, both of you, but I refuse to participate in such stories.

    Leave a comment:


  • Riss
    replied
    Ivconic , please translate into Serbian my posts 65 , 67 , 71 on Orbit . Explain to him that there is a difference between a nickname and a name . Еxplain to him that Riss in Bulgarian language is the animal lynx (на бугарском је животиња Šipak ). such a Bulgarian name ( Ris or Riss ) does not exist … my avatar shows a lynx . Тhere are a few spelling mistakes in Bulgarian on the smartphone . Иt appears from the smartphone screen (#74 01.09.2023 г., 20:43 ч ) that Orbit write in perfect Bulgarian … but - according to #72 Orbit is either Croatian or Serbian … explain to him - slowly, comprehensibly and repeat it to him at least 10 times , that 3 years ago I gave the idea with valuable advices regarding making a pulse induction detector 2 boxes type on Commander (#65
    01.09.2023 г., 07:07 ч ) . Commander not a name(such a Bulgarian name does not exist ) but a nickname . i said i haven't talked with Commander , and on the smartphone screen Orbit claims I called the same day ( 01.09.2023 ) ! Тo clarify- with Commander I know each other personally since 2015 , and Vladimir Lilov - the owner of the "Golden Mask" brand I know personally since 1997 . Dozens of links for the Valchan voivoda (wolf chieftain ) are Bulgarian. Ivconic , please explain to Orbit that these links are a discreet prompting ( suggestion ) to metal detector manufacturers that there is a market – demand ( hunger ) for hoard metaldetectors in all the states of the former Roman Empire- Bulgaria, Serbia, Turkey, Greece, France, England and many others…

    Leave a comment:


  • pito
    replied
    Click image for larger version

Name:	thumbnail_FullSizeRender-1.jpg
Views:	284
Size:	45.8 KB
ID:	414758
    On the right, coil Tx , L1 = 180t, L2 = 5t on top L1.
    On the left coil Rx, L3 = 300t.
    L1 and L3 are connected in series, changing the distance between the two coils, we are balancing the coils = minimum voltage on Rx.

    Leave a comment:


  • ZOUjiarui
    replied
    Hello, is the compensation coil directly wound 5 times in anti-phase on RX?

    Leave a comment:


  • pito
    replied
    Principle is the same as concentric coils except that Rx coil is on the side of Tx.
    Compensation coil has 5t and is connected in series with Rx coil.​Click image for larger version

Name:	images.png
Views:	309
Size:	5.4 KB
ID:	414716

    Leave a comment:

Working...
X