TM 808 White's

[mj620]

Please read the forum rules -> Basic Rules of the Forums
and make your posts in English.

This is English!

[ivconic]

Please read the forum rules -> Basic Rules of the Forums
and make your posts in English.

Lack of good spirit at admins here... pity!

Look what good spirit can do:

[Qiaozhi]

A képet a Képfeltöltés.hu tárolja. http://www.kepfeltoltes.hu

Please read the forum rules -> Basic Rules of the Forums
and make your posts in English.

[mj620]

A képet a Képfeltöltés.hu tárolja. http://www.kepfeltoltes.hu

[fmnotes]

@ kt315: thanks for sharing... are there many differences between your shematic and this one?[ATTACH]23042[/ATTACH]
in some other posts, the people (and so i) thought, its the right one.... its the earliest one i think with Cave-mode. I just dont understand the explanations in your last shematic: T/R Disc Mode timing, Deeper Mode Timing and the third unnamed one.

@ wubian: i´ve a lot of work to do at the moment, so i won´t have much time for the project. A cooperation is allways interessting... But if my PCB is old, it wouldn´t help much to send you my (incomplete) parts-list (which i would first have to write on PC). I ordered the things just to get started and to check the real difficulty of the project. If kt315 says, that his latest shematic is the same as mine, i´ll continue the project. If not, it would be a pitty and a too big waste of time for copying this 808 and maybe i´ll buy it somewhere used or new. But by the way... from what country are you from?

greets

Hello.
I want to construct TM808.
The schematic is correct?
Construct one's tm808;
And if it is good to, you can upload all the files together, pcb etc
to built this detector.
Thank wait your answer.

[schpeedy]

@ kt315: thanks for sharing... are there many differences between your shematic and this one?
in some other posts, the people (and so i) thought, its the right one.... its the earliest one i think with Cave-mode. I just dont understand the explanations in your last shematic: T/R Disc Mode timing, Deeper Mode Timing and the third unnamed one.

@ wubian: i´ve a lot of work to do at the moment, so i won´t have much time for the project. A cooperation is allways interessting... But if my PCB is old, it wouldn´t help much to send you my (incomplete) parts-list (which i would first have to write on PC). I ordered the things just to get started and to check the real difficulty of the project. If kt315 says, that his latest shematic is the same as mine, i´ll continue the project. If not, it would be a pitty and a too big waste of time for copying this 808 and maybe i´ll buy it somewhere used or new. But by the way... from what country are you from?

greets

[kt315]

i think for the quartz you can make 555 with the same frequency for mod

I had shared this schematic many times. you can do the TM-808 with ANY frequency.

[wubian]

hi

I was waiting for somebody reply on my question. I dont understand why nobody active on this topic, so I guessed there must be a problem on schematic or other materials. but If you want to make it, I want too...

in my country I can do, and have an access to many things. are you ready for co-operation? I think your pcb is for the old schematic. so tomorrow I give latest schematic to an engineer and ask him to make a pcb for me.

so could I ask you to send your part list of TM-808 for me? If yes please use the latest schematic's link that I wrote in my previous post and send it for me and I can buy all of them tomorrow too.

another thing is that I wanna make GPR and I'm very serious about it. but I have big problem, my english is very bad and I cant find references by myself. are there any one who want to start a gpr project together?

Cheers

[schpeedy]

i used the ones on the following side:

http://www.geotech1.com/forums/showthread.php?12324-TM-808-White-s/page2

and i hope they are the right ones.

[schpeedy]

What means "555"? I have ordered the original quarz with 26.27 kHz (or something like that) and i got it! Funny.

But @ wubian:
I also try to build it. I made my board on my own and used the latest pcb. I hope it was the right one. I ordered the most of the parts and will start in a few weeks to solder. Im also not sure about the coils. If it doesnt work, its maybe interesting to order them too... about 250€.

But let us know about your progress... there are not many people, trying to build this detektor.

regards

[chafik]

i think for the quartz you can make 555 with the same frequency for mod

[wubian]

Hi

one of my friend is master science in electronic field. I have plan to give him the latest schematic (TM-808 SMD) and ask him to make a PCB for me. he said that If I have a schematic it is possible to make a good PCB.

so please let me know If I had a PCB for this schematic, could I build this detector? I meas does this schematic correct and completely? and the coil for this schematic is same as on that sent on previous page?

are these pic and schematic for the same device?

http://www.geotech1.com/forums/attachment.php?attachmentid=3481&stc=1&d=1195493893

http://www.geotech1.com/forums/attachment.php?attachmentid=22051&d=1353082497

http://www.geotech1.com/forums/attachment.php?attachmentid=3538&stc=1&d=1195863366

Regards

[schpeedy]

I can not write to him, for whatever reason. Too bad.

[schpeedy]

Ok thanks again... i´ll ask him for more details...

Whish you the best!
Manuel

[kt315]

only one man had built the TM-808 and got an result, his board was been in SMD. I wrote his nick - veltex.

good luck