Tesoro Silver Sabre μmax repair

[lunamay]

hi guys
i have really poor repeired Tesoro Silver Sabre μmax . PCB is in good shape but all wire connections like coil and all pots are cut out..almost only pcb. I'm wondering if someone could look on pictures and tell anything helpfull..maybe some schematic or photos of your working TSS inside?

Also what parameters have coils for this model..could it work with dd like tgsl?

Best regards
Hope to get some answers

[kt315]

the PCB seems like Bandido II uMAX PCB. may be same one... the forum has a file BandidoIIwires.pdf (my archive keeps only the files from the forum, nothing of exclusive).
hi-res photos would be always GREATLY appreciated by society, besause will be served for someone whom will ask in the future. but thanks for those.

on a photo... a PCB reassembled... all details on the foam list now...

[lunamay]

thank you for answer. This board is form silver sabre micromax and i just can't find any schematics or photos of original boards..just to connect all the components like i should. if you would like to see bether photos tell me..anyone who can help would be wery kind

best regards

[woody]

hope it helps

[lunamay]

thx a lot!!it looks wery close to silver sabre..only pinpoint button is not present in bandido circuit..but anyway thx a lot

i'll clean my pcb and make new wires..we will see

[lunamay]

i would be very happy to see photos of wires inside of original tesoro silver sabre micromax..hope someone has one:P

[kt315]

i would be very happy to see photos of wires inside of original tesoro silver sabre micromax..hope someone has one:P

oh... only of bandido... but too similar you ask to... (note: those photos are not mine, taken from this forum, all my files are NOT exclusive and only been taken from the forum. Ivconic must be glad this fact.)

[lunamay]

great thank you wery much..it looks very same...only this pinpoint...i cant figure where to conect it:P

best regards

[lunamay]

little progres

hi
i think that i figured where to connect pinpoint button. it seems that it's place is in P21 and P22 on pcb..in few days i'll make some schematic / photos and show how to connect everything. It seems that silver sabre umax is very similar with bandido..the only difference in wiring that i noticed is , that bandido has ground ballance on front panel and ss umax has geb on pcb(trim). Another thing is that bandido has switch between automatic and pinpoint but ss has only pinpoint. Also it seems that it's very easy to make from ss umax a bandido..when i'll connect everything i'll post this information just to confirm..all that i wrote is not confirmed yet:P but soon will be
anyway i'll also try to connect coil from tgsl thread just to check is everything works good..maybe ss umax can have the same coil as tgsl

best regards to all

[simonbaker]

hi
i think that i figured where to connect pinpoint button. it seems that it's place is in P21 and P22 on pcb..in few days i'll make some schematic / photos and show how to connect everything. It seems that silver sabre umax is very similar with bandido..the only difference in wiring that i noticed is , that bandido has ground ballance on front panel and ss umax has geb on pcb(trim). Another thing is that bandido has switch between automatic and pinpoint but ss has only pinpoint. Also it seems that it's very easy to make from ss umax a bandido..when i'll connect everything i'll post this information just to confirm..all that i wrote is not confirmed yet:P but soon will be
anyway i'll also try to connect coil from tgsl thread just to check is everything works good..maybe ss umax can have the same coil as tgsl

best regards to all

Good work lunamay. It would be great to have more silver umax details, especially schematic.

-SB

[lunamay]

hi
few moments ago i connected everything using my first tgsl testing coil. pcb seems to work property..hmm..maybe not so god..because it's screaming like hell..but i'm glad because something is going on:P. i must check pots connection(maybe connected clockwise:P) the problem is that there is not enought space in pcb chasis..longest wire has 5 cm long:P(soon i'll post some photos) i think that everything is going in good direction

best regards
martin

[taliesin]

nice image

the PCB seems like Bandido II uMAX PCB. may be same one... the forum has a file BandidoIIwires.pdf (my archive keeps only the files from the forum, nothing of exclusive).
hi-res photos would be always GREATLY appreciated by society, besause will be served for someone whom will ask in the future. but thanks for those.

on a photo... a PCB reassembled... all details on the foam list now...

i like this image.it's surreal.

[lunamay]

hi
could someone guide me or tell me what is the value of treshold pot and what are the coil parameters.
specially i wold like to know is it possible to use a dd coil for this MD

best regards