Fisher 3 Piece Handle Kit for the Gemini 3 and TW6

[nelson]

Hi, does anyone have the Fisher 3 Piece Handle Kit for the Gemini 3 or TW6, for sale?

If so how much will cost me place in Santiago, CHILE
In advance many thanks
Regards
Nelson

[taliesin]

save your cash make one

i was going make one out of aluminium .mikebg said try wood so i used a broom handle works well .just need to make it more ergonomical.

[nelson]

Hi taliesin and thanks for your response.
By the way do you have or know exact details of the 3 piece handle, so this way we can build an exact copy of it?
Regards
Nelson

i was going make one out of aluminium .mikebg said try wood so i used a broom handle works well .just need to make it more ergonomical.

[taliesin]

try this thread all the links are here nelson

http://www.geotech1.com/forums/showt...ghlight=fisher

[nelson]

Hi again taliesin.
About your wood handle, do you have pictures to share of how you made it?
What about performance of your two box detector?
My email is [email protected]

In advance many thanks

Nelson

i was going make one out of aluminium .mikebg said try wood so i used a broom handle works well .just need to make it more ergonomical.

[Agraz]

Hello Nelson, I build this aluminum handle... work very well in Gemini III and other
mexican two box metal detectors, may be you want build similar.



Uploaded with ImageShack.us

here the other two knobs are diferent for the RX



Uploaded with ImageShack.us

in the handle the knob to the TX is also diferent



Uploaded with ImageShack.us


Uploaded with ImageShack.us



Uploaded with ImageShack.us



Uploaded with ImageShack.us



Uploaded with ImageShack.us



Uploaded with ImageShack.us

here the spring not go to other side



Uploaded with ImageShack.us

here the nut for the TX is inside



Uploaded with ImageShack.us

here the nut for the RX is outside

[nelson]

Hi my friend Agraz

First of all, my apologies for not responding on time, but i didn´t notice this respose before.

Ok i will try to watch your pictures that for now don´t open on my pc.May be the link is down, i don´t know.
Anyway, can you please send me the pictures to [email protected]

In advance many thanks

Nelson

Hello Nelson, I build this aluminum handle... work very well in Gemini III and other
mexican two box metal detectors, may be you want build similar.



Uploaded with ImageShack.us

here the other two knobs are diferent for the RX



Uploaded with ImageShack.us

in the handle the knob to the TX is also diferent



Uploaded with ImageShack.us


Uploaded with ImageShack.us



Uploaded with ImageShack.us



Uploaded with ImageShack.us



Uploaded with ImageShack.us



Uploaded with ImageShack.us

here the spring not go to other side



Uploaded with ImageShack.us

here the nut for the TX is inside



Uploaded with ImageShack.us

here the nut for the RX is outside