If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Looks like maybe a hematite nodule. Do a color test on a unfinished peice of porcelin like the underside of a toilet tank lid.
If the color is brown or brownish red its more than likley a hematite nodule.
one way to tell a metiorite is the surface will have concave formations where the hematite has protrusions or nodules.
Here is what I found with the FoxyPI:
Weight: 100-150 grams
Volume: 15 cu. cm
It has magnetic properties.
The surface does not conduct electrical current.
Firmware for testing of FoxyPI v3: https://acdc.foxylab.com/sites/defau...aloginputs.hex
In test mode, the metal detector generates a current pulse with a duration of 150 μs in the search coil after switching on, and then it displays the received signal on the screen. Pressing a button generates a new impulse, etc.
Examples of signals:
1 - without target, 2 - with target:
Hammerhead - the ingenious solution is:
You must order a used and broken Anfibio from Turkey - for half the price
and after passing the military control, you can make it work again! *laugh*
btw. my vibration circuit (see schematics) might be useful for under water.
Hello my friend, I am now working on the Pirate Metal detectorUnderwater
Salam, I am happy for your reply and that you can built a good detector now!
I saw complete series Chameleon with Haifa, now I know Egypt better. *laugh*
Very "hot" country, perhaps homebrew MD will be the best solution for you.
Sending detector by post-parcel from Turkey to correct person might work.
Leave a comment: