Arduino based VDI!

[dgm]

Hi, I to download the MD_V13 I downloaded the newliquidcrystal-I2c and arduino-menusystem libraries, and then magically managed to load the program.

[vlamvers]

I mentioned 2 post wrote error

MD_V11:260: error: 'class LiquidCrystal_I2C' has no member named 'setBacklightPin'


lcd.setBacklightPin(BACKLIGHT_PIN, POSITIVE);


^


MD_V11:260: error: 'POSITIVE' was not declared in this scope


lcd.setBacklightPin(BACKLIGHT_PIN, POSITIVE);


^


MD_V11:261: error: 'class LiquidCrystal_I2C' has no member named 'setBacklight'


lcd.setBacklight(params.m_LcdBacklight ? LED_ON : LED_OFF);
....

[dgm]

Hi Vlamvers, what are your problems? Let me know if I can help you !!

[vlamvers]

Thank you Mr. Hyena and Mr. Nàndor, I magically solved the problem, I uploaded the newliquidcrystal 3 library ... and the program went wrong, Thanks again ...

Can you lay out, what did you do?

[vlamvers]

D:\Adruino_experiments\MD_V11\MD_V11.ino: In function 'void setup()':


MD_V11:260: error: 'class LiquidCrystal_I2C' has no member named 'setBacklightPin'


lcd.setBacklightPin(BACKLIGHT_PIN, POSITIVE);


^


MD_V11:260: error: 'POSITIVE' was not declared in this scope


lcd.setBacklightPin(BACKLIGHT_PIN, POSITIVE);


^


MD_V11:261: error: 'class LiquidCrystal_I2C' has no member named 'setBacklight'


lcd.setBacklight(params.m_LcdBacklight ? LED_ON : LED_OFF);


^
Use LiquidCrystal_I2C в папке C: \ Users \ paylo \ OneDrive \ Documents \ Arduino \ библиотеки \ LiquidCrystal_I2C (наследство)
Use EEPROM версии 2.0 из папки: C:\Users\paylo\AppData\Local\Arduino15\packages\ar duino\hardware\avr\1.6.13\libraries\EEPROM
Use Wire версии 1.0 из папки: C:\Users\paylo\AppData\Local\Arduino15\packages\ar duino\hardware\avr\1.6.13\libraries\Wire
Use MenuSystem в папке: C:\Users\paylo\OneDrive\Documents\Arduino\librarie s\MenuSystem (legacy)
exit status 1
'class LiquidCrystal_I2C' has no member named 'setBacklightPin'

[dgm]

Hi, I wanted to ask where I can get X and R components, on idx pro? Thank you..

[Nandor]

Good to hear that you made it . Have luck.

[dgm]

Thank you Mr. Hyena and Mr. Nàndor, I magically solved the problem, I uploaded the newliquidcrystal 3 library ... and the program went wrong, Thanks again ...

[dgm]

Hi Mr. Hyena, thank you for having responded, can you help me somehow? Thanks again...

[Hyena]

It looks like you have problem with I2c/display. I had the same fault. I just found working Hello word code for my I2C and display and then I replaced those lines in original MD_13 sketch.

[dgm]

Hi, Mr. Nàndor, Thank you for having responded, but honestly did not understand if it is my hardware fault, or the MD_V13 sketch has any problems, my question is if you have worked with this SIg project in the Mr. Daren. Thank you ..

[Nandor]

Me too, I have to learn more. But it would be an awesome feature to have and a pinpoint mode depth indicator.

[Hyena]

I think that would be much easier to mod Darens project, because that bar graph is quite a bit complicated piece of code (for me). Its a year i finihsed it for IGSL and I am still learning from it...

[Nandor]

Would it be possible to add bar graph somehow to VDI Experiments? so it would show VDI, metal name and the Bar graph too.

[Hyena]

But once you try Darens bar graph, you will not want anythinkg else

I am now trying to use it with oled SSD1309 (128x64) display, but it is 15 years ago when I programmed in C last time... Again - patience is the word that i need to repeat.