Unlike a BFO or VLF detector, it uses a ‘time of flight’ chip, the TDC7200, to measure frequency and amplitude change with...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
9 results in 0.0018 seconds.
Keywords
Members
Tags
-
Wombat Pulsed Oscillation
The ‘Wombat Pulsed Oscillation’ uses a mono coil and capacitor (tank circuit) oscillating freely, similar to a good old BFO or a ‘VLF’ detector.
Unlike a BFO or VLF detector, it uses a ‘time of flight’ chip, the TDC7200, to measure frequency and amplitude change with...
-
Help for XP ADX 150 - Unknown 10-pin IC near crystal (TX stage)
Hi everyone,
I'm repairing an XP ADX 150 mainboard. The 10-pin IC located right next to the crystal , burned out after the coil cable was damaged.
The original IC markings are factory erased by XP.
Here are the PCB pin measurements without the IC installed:...
-
SPULE32 Coil modelling software by AZIZ
Aziz and myself have collaborated to bring you SPULE32 which is Aziz's coil modelling software.
He has kindly provided the original source code ( C, C++, ASM ) which originally was built for windows and I ( with AI help ) have ported to Javascript.
So to be clear Aziz did all the work and...
- Likes 3
-
AI can't invent. AI isn't creative.
Hi all,
we are really far from AGI (Artificial General Intelligence).
https://en.wikipedia.org/wiki/Artifi...l_intelligence
I have invented a most powerful drawing transfer method (for fine arts) a couple of years ago and it isn't published yet.
So all the...
-
Garrett Infinum/ATX mono coil
The mono loops have a TX and RX winding which are fully coupled and not inductively balanced. The Tx/Rx are wound together. The Tx is 18awg tin plate stranded with pvc insulation(258uH 0.6R). The Rx is about 30awg single strand teflon or kynar insulation(228uH 6.0R). Inside the coil is a protection...
Last edited by Altra; 04-14-2026, 06:41 PM.
- Likes 3
-
Byko started a topic Multifrequency VLF IB Detector using Dual-Resonance Foster Network (6 18 kHz, 1st 3rd Harmonic)in Tech ForumMultifrequency VLF IB Detector using Dual-Resonance Foster Network (6 18 kHz, 1st 3rd Harmonic)
20260923 #2 Multifrequency VLF IB Detector using Dual-Resonance Foster Network (6 &18 kHz, 1st & 3rd Harmonic)
The hardware base is the Quasar ARM: https://fandy.ucoz.org/QuasarARM/Quasar_ARM_SCH.pdf
Multifrequency firmware is written, but the TX driver output is a...
-
Delta Pulse - Take 2
The original Delta Pulse thread has a corruption in the database that is causing problems on page #152. I have closed the original thread and started this new one. Please continue the discussion here.
Carl is going to investigate the problem, but we're not hopeful that the database can...
- Likes 1
-
PIM-2 Digital Metal Detector Project
PIM-2 is digital version of Delta Pulse. You can obtain all documents at following link.
http://www.lugatek.com/forum/index.php?topic=150.0
Good luck
...
- Likes 1
-
Full m/lab SD2000 schematics
Thought i would share with you all the full schematics i made up for
the M/lab SD2000.Over the years with all the fiddling on the 2000
i did and the resulting hand drawn schematics,why not do the whole
thing and present it to those that have an interest.
I would like to give...Last edited by Carl-NC; 03-03-2008, 02:55 AM.
- Likes 3