For sale bare boards for Delta Pulse/Sniffer XR-71

[kt315]

6666, it is delta pulse made via on turkish one-sided layout. this man was not so active in the forum so I do not remember his alias...
yes Delta Pulse is very stabile if you do all right, are able attentionally read and appreciate all suggestions
and have direct hands (much people are drunk making DP - it is BAD). yes the coil is simple, ordinary, standart classic monocoil
for all PI's adaptiving.

Anatloy

[6666]

Hello Kt315

https://www.youtube.com/watch?v=1zOiO41PeiQ

Do you know the person in this video ?
Do you know the detector he has made ?
It looks to be a very simple coil with no shield, but its looks like he can touch the ground with no falseing
do you know what type of coil he made ?

Thanks
6666

I also ask question in Google translate

Знаете ли вы человека в этом видео?
Знаете ли вы, что детектор, он сделал?
Она с нетерпением быть очень простая катушка с нет щита, но его смотрит, как он может прикоснуться к земле, не falseing
Вы знаете, какой тип катушки он сделал?

Спасибо
6666

[kt315]

Because our post office did rise up a price on shipping I have to change a price too. Earlier I sent via 'at ground transport', it gave some economy to you... But rules was changed, now left only 'via airmail' way, I have to follow it. New price is 32USD. You get bare board, DVD-ROM and my everyday on-line support. I hope now you ll get more fastly, because 'airmail'.

Anatloy

[kt315]

maximus does turkish layout pcb's and gets a trouble. TURKISH! NOT mine board used!

[kt315]

Several people have already said that this board does not work correctly

who concretely? aliasas?

[sinko1]

I do not understand,why peoples buy from unknown people unknown board? Several people have already said that this board does not work correctly,there are so sites that offer tested and working circuits with Warranty

[kt315]

a link I told about successful testing of autoreset mod http://www.geotech1.com/forums/showt...-Pulse/page102
you have to get working board at first, then to think the mod is needed for your or not.

Anatloy

[kt315]

ok, use 4.75k. you can use - 4.68 4.7 4.72. 4.75 4.76 4.77 etc. they have to be EQUAL in couples - R25=R26 R23=R24. FOR EXAMPLE - you can take
4.68 for couple R25=R26 and 4.77 for R23=R24.
yes, I use TL081 because I have not LF357, but I have to DEMONSTRATE for my potencial orderers that MY BOARD IS WORKING
BOARD, no MISTAKES, NOTHING OF NECESSITY TO DO ADDITIONALLY.
why the part list to DP board is NOT enough for you???

[sabios]

the R1,620k and found it but I can not find the 4.72k resistor, only found the 4.7k, 4.75k with a tolerance of 1% and I wonder if any of these are used.
else in a photo I saw that you can also replace the LF357 by TL081CP.
It's true.

[kt315]

I forget that silly photo

Hi I have some questions.
why did this photo marking the Doubts I have.
1. Necessary PROVED is to put the elements of the picture.

pls do not do a mod if you do not know -
1. where the mod was described;
2. what gives the mod.

2. R23, R24, R25 4.72k resistors are but I want to know if I can put something on That I found not.

5% 10% tolerance resistors have a nominal 4.7k, but 6 band colour 0.05% 0.1% tolerance resistors have a nominal 4.7xk (4.72k). because THE TOLERANCE.

I found the R1 620K Also can put another in Its place and what would all those endurance replacement.

you can put any value resistor but have to get 100Hz in T2 point, for electric net standart 50Hz in your country, or 120Hz, for 60Hz electric net standart.

FOR USA - 60HZ - 120HZ
FOR UK - 50HZ - 100HZ

Otherwise just out of curiosity, this is not you can put the lcd right ...?

and what this give you? more depth? discrimination? what? DP is not THE sh.ttector to put lcd in every hole.

thanks in advance.

....

good luck

[sabios]

questions

I forget that silly photo

Hi I have some questions.
why did this photo marking the Doubts I have.
1. Necessary PROVED is to put the elements of the picture.
2. R23, R24, R25 4.72k resistors are but I want to know if I can put something on That I found not.
3. I found the R1 620K Also can put another in Its place and what would all those endurance replacement.

Otherwise just out of curiosity, this is not you can put the lcd right ...?

thanks in advance.

....

[sabios]

Not to sound silly.


Hi I have some questions.
why did this photo marking the doubts I have.
1. is proved necessary to put the elements of the picture.
2. R23, R24, R25 4.72k resistors are but I want to know if I can put something on that I found not.
3. I found the R1 620K also can put another in its place and what would all those endurance replacement.


otherwise just out of curiosity, this is not you can put the lcd right ...?


thanks in advance.

[kt315]

Hi Bernte One,

I have now three blank board and one I leave for some case. I also will send with DP now Hammerhead board as free, for winterproject.
but only write me a note that you order DP with HH, another way I will send only DP pcb.
post office rule was changed, they say now all mails sending only via air, no more un-airmail.
so you will get a parcel more fastly. however I do not up the price, it is same the 29USD.
my loss is your obtaining.

thank you

[bernte_one]

hello kt315

can you you tell us all pcb that you have to sell?

searching for winterproject for german Forum
but not sure if a Version of Admiral/wave (maybe Adrenalin vlf)
or something else as project

[kt315]

[longly] slowly***