Announcement
Collapse
No announcement yet.
For sale bare boards for Delta Pulse/Sniffer XR-71
Collapse
X
-
Mehmet, not soon as possible but longly and checking detaily every step. no problem in the schematic. no problem in the PCB layout.
all problems are because of your inattention.
good luck
Leave a comment:
-
Thank you for the answer, I will try to solve the problem as soon as possible
Leave a comment:
-
do you see or not? why you do mistakes? why you did not check what you do? why I have to find out your problems at YOUR PICS???
I ASK AGAIN AGAIN AND AGAIN NOT DRINK ALCOHOL YOU SOLDERING ANYTHING!
Leave a comment:
-
dear mege,
where is error? is at the schematic or at the board? I did check the layot at study of P-CAD many times, 1000th times, by tools of P-CAD.
all errors are excluded.
had you measured all resistors before soldering as I asked all people to do? try to connect the input of NE555 to +E and get the sound.
desolder IRF740, connect a power supply to control part directly, connect cathode of VD9 to anode of VD8 by wire, -12V to -E point,
and try to find the sound.
Leave a comment:
-
dear kt315,
I've completed the circuit, I think there is an error! ,steady light green led,no sound
Where is the problem?
Leave a comment:
-
hello Dean, glad to see too the board reached you. while I did think the parcel has been lost... I got a reply from Australian post site.
Please find attached a summary of your enquiry details below.
If you require further assistance with your enquiry, please respond to this email at your earliest convenience.
Thank you for contacting Australia Post.
Summary
please any info on parcel with number RN600307781LT was sent from Lithuania, EU....
Discussion Thread
Response Via Email (David P)04/08/2014 05.29 PM
Dear Anatolij
I appreciate the time you have taken to contact us about the parcel sent to you from Lithuania and I am happy to assist with your enquiry today.
Anatolij I am very sorry to hear that the article you have been expecting has not been delivered. This article should have been delivered by now, or a card left in your letterbox letting you know that it’s awaiting collection at the post office.
Our records show this article was last scanned in Lithuania on 03 July 2014, however there is no indication the article has arrived in Australia.
As this article has not yet been delivered I believe that an investigation should be launched right away to have it located for you. To enable enquires to commence into this matter, we require the sender to lodge an enquiry via their local postal authority, who will liaise with Australia Post throughout the investigation. I can understand this may be inconvenient; however, the sender needs to launch this investigation as by law they are the owner of this article until it has physically been delivered to you and they have access to all the relevant paperwork needed to ensure the most thorough investigation takes place.
Once the sender has launched this investigation we can begin our very thorough search to locate your article. If you need any clarification please do not hesitate to ask.
Kindest regards
David P| Digital Sales and Service | Australia Post
Online Services Consultant
GPO Box 9911 In Your Capital City
www.auspost.com.au
Customer By Web Form (...)29/07/2014 08.20 PM
please any info on parcel with number RN600307781LT
was sent from Lithuania, EU.
best regards
Reference No 140729-001950
Product Level 1: Domestic Parcels
Product Level 2: Registered Post Parcels
Category Level 1: Tracking enquiry
Date Created: 29/07/2014 08.20 PM
Last Updated: 04/08/2014 05.29 PM
Status: Closed
This email was sent by Australia Post. Australia Post does not represent, warrant or guarantee that the integrity of this email communication has been maintained nor that the communication is free of errors, viruses or interference.
[---001:002074:14860---]
Leave a comment:
-
I think they are under"
\Delta Pulse Sniffer XR-71\files_P-CAD_2006
Leave a comment:
-
Hi kt315,Originally posted by kt315 View PostHi Dean, still at the way... I think. can you print the till slip attached and to ask in your post office?
[ATTACH]30741[/ATTACH]
[ATTACH]30742[/ATTACH]
The PCB and CD arrived today so look forward to assemble and test and will feedback my results on the DP3 thread..!
Can you advise back please where on the CD should I look for the build documents..?
Cheers,
Dean
Leave a comment:
-
still no reply from this site (((
Australia Post <[email protected]>
Thank you for contacting us via email. We are presently experiencing unusually high demand for online support which is affecting our normal response times. We apologise for this inconvenience and will be in contact with a response to your enquiry as soon as possible.
This is an automatically generated response and is not intended to answer your enquiry. Between now and when we respond to your enquiry, please feel free to find out more via:
Frequently asked questions https://contactus.auspost.com.au/ - find answers to a wide range of customer questions
Twitter - http://twitter.com/auspost - ask @auspost your question and we'll get back to you
YouTube – http://youtube.com/australiapost - find a growing range of information about our products and services
Facebook® - http://www.facebook.com/AustraliaPost - sign up to subscribe to Australia Post and post us your query quickly and conveniently
Brady Jacobsen
General Manager, Australia Post Customer Sales and Service
Reference No 140729-001950
Summary: please any info on parcel with number RN600307781LT was sent from Lithuania, EU....
Product Level 1: Domestic Parcels
Product Level 2: Registered Post Parcels
Category Level 1: Tracking enquiry
Date Created: 29/07/2014 08.20 PM
Last Updated: 29/07/2014 08.20 PM
Status: Open
Discussion Thread
Customer By Web Form 29/07/2014 08.20 PM
please any info on parcel with number RN600307781LT
was sent from Lithuania, EU.
best regards
This email was sent by Australia Post. Australia Post does not represent, warrant or guarantee that the integrity of this email communication has been maintained nor that the communication is free of errors, viruses or interference.
Leave a comment:
-
Ya I thought it was a problem at first well both times but it came its our country's fault with all the security that's what I think.
Leave a comment:
-
Hi Calebsone,
Yes I thought this might be the case so I think I will give it a few more weeks perhaps before I start to follow up.
I have sometimes waited several weeks just from Hong Kong and this is the first time I have made a purchase from Europe so I am not sure what to expect to be honest..!
Leave a comment:
Leave a comment: