If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
If I still want to have all metal mode in the Raptor, would the correct way be just to add a switch as presented in the picture below? The switch could be in the second pole in the disc switch, position “0”.
If I still want to have all metal mode in the Raptor, would the correct way be just to add a switch as presented in the picture below? The switch could be in the second pole in the disc switch, position “0”.
Leave a comment: