Barauda upgrade???

[jladre]

Jladre, swing beep is gone, its beep only when you shake turn.

Try mod your baracuda board, and add a new 40106

Thank you ripsdevala!��

[ripsdevala]

Jladre, swing beep is gone, its beep only when you shake turn.

Try mod your baracuda board, and add a new 40106

[ripsdevala]

Swing beep is gone, beep only when you shake it up and down, let me test again to make sure.

[jladre]

No its not, im following Q at post 102
http://www.geotech1.com/forums/showt...it-Rev2)/page5
Geo baracuda have different track, especially from 40106

Does it completely eliminate the end beeping problem as what other have trouble? I want to make one to look the difference.

[ripsdevala]

No its not, im following Q at post 102
http://www.geotech1.com/forums/showt...it-Rev2)/page5
Geo baracuda have different track, especially from 40106

[jladre]

[QUOTE=ripsdevala;222069]Sorry wrong jumper


hello ripsdevala! does this changes follows schematic of the upgraded geotech barracuda??

[ripsdevala]

Look at the Geotech Baracuda project thread, where you will find the Build Document and schematic ->Geotech Baracuda
All the required fixes are listed in the Build Document.

Yes, already use it, not finish yet, the 40106 track is change alot, so different with the last one

[Qiaozhi]

Look at the Geotech Baracuda project thread, where you will find the Build Document and schematic ->Geotech Baracuda
All the required fixes are listed in the Build Document.

[ripsdevala]

Sorry wrong jumper


Sprit
CUDACUDA.lay6.zip
Ignore bc547 circuit its just a batt addon for pcb empty space and i change the order of threshold resistor

[bernte_one]

hello ripsdevala,

seems like sprint layout, additionel Connections are good upgrade
can you post sprinlayout file as zip Container or so?

i have also some boards here will add the upgrade, thx

[ripsdevala]

Following Qiaozi fix explain from post 102...
http://www.geotech1.com/forums/showt...it-Rev2)/page5

Already test it and work, no more swing beep, only tilt.
Please check if I already on the right path.
Btw, its working only at day not at night, maybe there is interferences device turn on at night and make beep beep beep.



https://youtu.be/xEMomBOjxMU
Still using bf245 as 2n5485 and 2x mpf102