BARACUDA-Legend-1

[Qiaozhi]

if the barracuda could make different sound for each metal???

The Barracuda is a pulse induction detector and therefore cannot discriminate between different metals.

[antonioknight]

if the barracuda could make different sound for each metal???

[antonioknight]

if someone can send me every detail???? please and if the barracuda could make different soun for each metal???

[antonioknight]

please can someone send me the correct pcb with the components to make barracuda if someone can guide me??? [email protected]

[sinclairuser]

Succes !

thanks apberg!

[ApBerg]

pcb

hello everyone just got around to sorting out my barra does anyone have a picture of the underside of the rev2 board(after its been correcttly soldered!)
i know there is such a picture of the rev1 board but i cant find a rev2 pic i want to double check my soldering
thanks ally x

Succes !

[sinclairuser]

hello everyone just got around to sorting out my barra does anyone have a picture of the underside of the rev2 board(after its been correcttly soldered!)
i know there is such a picture of the rev1 board but i cant find a rev2 pic i want to double check my soldering
thanks ally x

[satdaveuk]

Hi
Is C3 very critical, because had a bag of 50 and gone through half of them and not one is anywhere close

[hispalba]

Hello
bernte_one and satdaveuk
Sorry. The value I put into the pcb is not 4N7, is C3=6n8
regards

[nelson]

Hi my firends

I just read your anwers and i will check my barracuda this weekend.
The problem stars a minute or five minutes after you turn on the detector. So i will test the unit with a power supply to enshure the batterie is not the problem and also i will look for capacitors.
7660 could be the problem to and the coil i think is fine, cause is the same that i build for my first barracuda and it worked good.

Thanks a lot to all your comments and support

Regards

Nelson

[satdaveuk]

Thanks Hispalba your a gent

[bernte_one]

hello hispalba many thanks for smd board

[hispalba]

Hi

Barracuda SMD

Regards

[grizzly]

Thanks

[jap]

s

Hi grizzly
see
best time
j.