The Moodz detector lives !

[soverey]

Any progress on the building document?

[moscadondres]

Why i can't open the Moods pulsar on australian,i am interesting by your detector,regards.

[greylourie]

Yes, most excellent. Very good to have all the info in one document. There are some good examples by Geotech members and admin, too. Another I looked at just recently (by DBFlowers?), was linked to by Koala in response to someone asking for coil build info. So useful, whenever someone has questions.

[soverey]

The building document looks well structured, good idea for pluggable frontend module , it leaves room for later developments

[serci78]

Thank you moodz
moodz detector there is also information here

http://australianelectronicgoldprospectingforum.com/moodz-pulsar/

[moodz]

Thanks ... all ... I have added some content ( schems ) to the BD so you should now get and idea how this is going to go. The frontend will be a separate pluggable module. If you have any suggestions or comments that you feel should be included now is the time to start discussing in the thread and then if most agree its a good idea then will go into document. ... the idea author will get a credit in the revision log.

[Monolith]

Build Document Template ... this is the base document that will be populated with the build info as required to construct. This is just a template ... it needs more detail but will be updated as contributions / edits are made.

This looks like an excellent project development tool. Congratulations.

[moodz]

.... not trying to upset you ... its just I already stated there was errors and that I would create a "container" the build document to put everything in ... when we start putting the detail into the build doc ( template posted above ) .. then the questions can start and the corrections / suggestions folded back into the build doc.

[mickstv]

I wasn't building it, I was just asking some questions.

[moodz]

Build Document Template ... this is the base document that will be populated with the build info as required to construct. This is just a template ... it needs more detail but will be updated as contributions / edits are made.

[moodz]

... I said dont build it ... the front end is a place holder .... I am converting the design into two parts. A backend with all the cpu power signal chain etc and a pluggable front end so front ends can be changed.( with the damping etc ) ... The cct above is in mid draw ... it has errors.
The build document will contain the build instructions.

[mickstv]

Thanks.

Is the link between CX1 and D2 the problem ?

[moodz]

No its not correct ... thats why I said dont build it :-) ... normal PI gate control.

[mickstv]

Hi Moodz, is that part of the circuit correct ? How are you triggering Q1, normal PI gate control or TEM gate control ?

[Geo]

Thanks Moodz
I wait for the extra details