Announcement

Collapse
No announcement yet.

TGSL EDU Mod

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Silver Dollar
    replied
    Check here #1404. This was done to a IGSL which is 2 TGSL's on one board.

    http://www.geotech1.com/forums/showthread.php?17861-IGSL/page57&highlight=igsl

    Leave a comment:


  • manny77
    replied
    Hello Silver Dollar,
    I made a good working TGSL last year. Very good, it can detect 1 euro coin at 30+ cm. I made some little mods to it to suit to my preferences in antichatter section of the circuit. And dfbowers mod to increase sensitivity (connecting sens pot not to ground but to negative voltage).
    Only problem is chattering. The MD is sensitive to some sort of RF emi. It is very quiet at home and in several places, but in some case it tend to be noisy and i had to lower sens at a low level...

    You think this mod can improve my MD? Where did it is treated? I cant't find it in the forum...

    Thanks in advance!

    Leave a comment:


  • Silver Dollar
    started a topic TGSL EDU Mod

    TGSL EDU Mod

    For those that missed it here is a mod to TGSL EDU to allow a bit more gain and cleaner output.

    Remove D8, D9, C20, C23, R33 and put diodes at C20 and C23 reversed from D10 and D11
    and change R29 and R31 to 1 meg.

    Thank Davor as he created this mod on the IGSL.

    Click image for larger version

Name:	EDU Mod.jpg
Views:	1
Size:	168.4 KB
ID:	368906
Working...
X