PROBLEM TGSL

[dfbowers]

fishbone = herringbone = sawtooth????

A good challenge! Looks like help is on the way!

-SB

I plugged my text into Babelfish and translated to French, then back to English. Definitely gets scrambled!

[simonbaker]

I couldn't understand it either ... but I doubt that he meant "le poisson".

fishbone = herringbone = sawtooth????

A good challenge! Looks like help is on the way!

-SB

[dfbowers]

hello has all! it functions c' was well the 2n22222 on the other hand j' have many false signals when I touch wire or the circuit

Are you using a shielded cable and have you added a shields to your coils? If done, this should eliminate your problem.

I would highly recommend trying to ground your coils as pictured below, using a standard USB-2 cable.

[KRISEMA]

hello has all! it functions c' was well the 2n22222 on the other hand j' have many false signals when I touch wire or the circuit

[KRISEMA]

hello has all! afflicted for this bad translation! then here is my problem: j' made the TGSL starting from the plans D Ivconic, the concern and when I start the bipppp test of battery sarète not j' saw that tiktak had the same problem (page 15 of the forum) but it used pn22222 in the place of the 2n22222; here I do not know any more or to seek. thank you d' advances for your assistance

[dfbowers]

Hello to all Here is I have just made the TGSL d ivconic and I have the audio test in the started which not fish bone(edge) not please in the help

Bonjour, Krisema. Svp repost votre question employant ici l'URL ci-dessous pour traduire exactement votre texte : http://babelfish.yahoo.com Beaucoup de personnes peuvent vous aider avec cet excellent projet si nous pouvons vous comprendre. Don

[Qiaozhi]

Remove the fishbone carefully, then apply the Heimlich maneuver which should clear any remaining.

Cheers!

-SB

I couldn't understand it either ... but I doubt that he meant "le poisson".

[simonbaker]

Hello to all Here is I have just made the TGSL d ivconic and I have the audio test in the started which not fish bone(edge) not please in the help

Remove the fishbone carefully, then apply the Heimlich maneuver which should clear any remaining.

Cheers!

-SB

[KRISEMA]

Hello to all Here is I have just made the TGSL d ivconic and I have the audio test in the started which not fish bone(edge) not please in the help