complete project

[mschmahl]

@6666
We had the right schematic but only in PDF (see here http://www.geotech1.com/forums/showt...947#post155947). But we need it for DesignSpark and i get a uncompleted, by tinkerer rescued zip to work with. So i don´t have to make all new. I had made the changes that we discussed in the uncopleted scheamtic and post this schematic and the same as pdf, because Sido asked (see post 253). Later, when i had time, i updated the DesignSpark-schematic with this changes with the PDF-Schematic from Tinkerer (the right one). Now we have a new DesignSpark schematic and a new PDF which is the original schematic from Tinkerer with this discussed changes.
I hope it is clearer now.

[6666]

Its from the PDF published by mschmahl
we find these things when we study other peoples work.

[Tinkerer]

Sorry for my uncomplete update. I have now updated to the reference-PDF Tinkerers_SB_MO - Schematic from here http://www.geotech1.com/forums/showt...947#post155947
with all changes, that we have discussed previously. I hope i have not done a mistake.

Here are PDF and Schematic for DesignSpark

@tinkerer
If i can do something for you, let it me know.

Greetings from Saxony

Thank you for your help.
You know, it is really a small world. I was raised in the house that belonged to the prince of Saxony, the one who abdicated his throne. I am returning there.

The prince had a mock throne built in that house. I spent many hours of my youth sitting on it, the view was just beautiful. I am going back there now and will sit on the mock throne again and feel like a (abdicated) king.

[Tinkerer]

Ha, please eleborate if dont mind......I am lost

Cheers sid

Ha, please eleborate if dont mind......I am lost

Cheers sid

The president is dying of cancer in some Cuban hospital. Over his 14 years of totalitarian rule, all the infrastructure and 90% of the economy has been destroyed. The roads are full of holes, the bridges are falling down, electricity is rationed by switching off one part of the country at the time to supply the other part. There has never in the history of the country so much income due to the high petroleum prices, yet all that money has been wasted. And on top of that, the national dept has increased tenfold.

Poor people who will have to pay all that.

[Tinkerer]

Probably the End is near for Mr. Chavez, but not for Venezuela's woes. It'll take a long time to undo the damage.

At best it will take several generations to pay off the dept and to repair the damages to the economy. And the bottom has not been reached yet. Much worst is to come before any improvements.

[Tinkerer]

Hi Tinkerer, I live in Australia, and in the reports through the world Media so far that we a moving forward from the rest of the Global civilization as a stabilized economy....well we are experiencing the effects of the European Economic downfall, even though our unemployment rate is stated to be so low (5.9%). Our situation is worse than stated

Why....They tell us that they have created so many jobs....(They dont tell us of the many that are lost in comparison) Our current Government does not tell us that most people are in Part Time/Casual work, therefore make it look as employment is so low, which is NOT.

What keeps our Economy afloat is the ubundance of mineral resourses (mining) and the Asian continent's interest in our vast and expansive mineral and agricultural supply...wich our current Government and predessesors have agreed to such FATAL transactions

Alot of our Land has been sold off overseas. I can imagine what our children and Grandchildren are going to face in the near distant future.

Not good times for all humanity

If their is any parts you may need Tinkerer, i am more than happy to ship to you providing there is going to be no Customs issues

Cheers sid

Sido, thank you for the offer. I am already packing, so I really do not need anything.

To the members of the forum, sorry for having brought up politics, which have no place here. Unlike most of the rest of the world, this country is going through a never seen financial boon due to the high petroleum prices. To have food rationing and to have to stand in line at the supermarket for 4 hours to be able to buy 3 rolls of toilet paper is just not within any reason anymore.
I hope you all can forgive me for having discharged my bad humor here on the forum.

[mschmahl]

Sorry for my uncomplete update. I have now updated to the reference-PDF Tinkerers_SB_MO - Schematic from here http://www.geotech1.com/forums/showt...947#post155947
with all changes, that we have discussed previously. I hope i have not done a mistake.

Here are PDF and Schematic for DesignSpark

@tinkerer
If i can do something for you, let it me know.

Greetings from Saxony

[Aziz]

Sorry to hear this Tinkerer.
I hope everything gets better soon.
Aziz

[sido]

Probably the End is near for Mr. Chavez, but not for Venezuela's woes. It'll take a long time to undo the damage.

Ha, please eleborate if dont mind......I am lost

Cheers sid

[Carl-NC]

Probably the End is near for Mr. Chavez, but not for Venezuela's woes. It'll take a long time to undo the damage.

[sido]

You are not helping anyone by posting wrong versions of the circuit. this is not the circuit posted at http://www.geotech1.com/forums/showt...947#post155947.

Unfortunately I am living in a country that is going down the drain completely. Whatever food you can get, is rationed. There is no sugar since many months, there is not flower, no oil, no chicken, no meat. THERE IS NOT EVEN TOILET PAPER. There is no president either. The Cubans have taken over the country.
The electric power goes out nearly every day and sometimes no power for days. When there is power, there are high voltage spikes that destroy the appliances.
No wonder my computer is having fits and the safe storage hard drive crashed.
I posted what I could find in the backup work files for mschmal to have a Designspark circuit to build on, since he is so kind to help.

You are very welcome to help, but posting wrong versions does not help anybody.

Hi Tinkerer, I live in Australia, and in the reports through the world Media so far that we a moving forward from the rest of the Global civilization as a stabilized economy....well we are experiencing the effects of the European Economic downfall, even though our unemployment rate is stated to be so low (5.9%). Our situation is worse than stated

Why....They tell us that they have created so many jobs....(They dont tell us of the many that are lost in comparison) Our current Government does not tell us that most people are in Part Time/Casual work, therefore make it look as employment is so low, which is NOT.

What keeps our Economy afloat is the ubundance of mineral resourses (mining) and the Asian continent's interest in our vast and expansive mineral and agricultural supply...wich our current Government and predessesors have agreed to such FATAL transactions

Alot of our Land has been sold off overseas. I can imagine what our children and Grandchildren are going to face in the near distant future.

Not good times for all humanity

If their is any parts you may need Tinkerer, i am more than happy to ship to you providing there is going to be no Customs issues

Cheers sid

[Tinkerer]

Hi
the penny dropped maybe its a RC filter doh !
thats my seniors moment for the week.

You are not helping anyone by posting wrong versions of the circuit. this is not the circuit posted at http://www.geotech1.com/forums/showt...947#post155947.

Unfortunately I am living in a country that is going down the drain completely. Whatever food you can get, is rationed. There is no sugar since many months, there is not flower, no oil, no chicken, no meat. THERE IS NOT EVEN TOILET PAPER. There is no president either. The Cubans have taken over the country.
The electric power goes out nearly every day and sometimes no power for days. When there is power, there are high voltage spikes that destroy the appliances.
No wonder my computer is having fits and the safe storage hard drive crashed.
I posted what I could find in the backup work files for mschmal to have a Designspark circuit to build on, since he is so kind to help.

You are very welcome to help, but posting wrong versions does not help anybody.

[6666]

Hi
the penny dropped maybe its a RC filter doh !
thats my seniors moment for the week.

[Tinkerer]

Am I looking at your circuit correctly ?
the signal comes out of C29 and goes to ground ?

Please look at the schematic at the post below.
http://www.geotech1.com/forums/showt...947#post155947

[6666]

Am I looking at your circuit correctly ?
the signal comes out of C29 and goes to ground ?