Pinout Garrett Infinium LS DD power coil

[sabke]

Hi,

I did get a Garrett Infinium LS power DD coil from a friend, however his dog chew of the connector. As of this I am looking for pinout.



It have 4 wires
Green
White
Black
Red


Thanks for your help

[WM6]

Hi,

I did get a Garrett Infinium LS power DD coil from a friend, however his dog chew of the connector. As of this I am looking for pinout.



It have 4 wires
Green
White
Black
Red


Thanks for your help

Can you make some measurement on those wires (inductance and resistance)?

[sabke]

Dont have a multimeter at this moment.

however i did find this see

http://www.geotech1.com/forums/showt...t=14582&page=2

This garrett coil have the same wires color as the coil what I have.
do you think that will be the same?

[WM6]

Yes, good finding. This have to be Infinium DD coil:
With resistor one is RX.

[sabke]

Many thanks

[jtz54]

I've heard the the Infinium coils had two coils even on their mono? Can anyone confirm that. On the DD coil, is the black coil the transmit because of the damping resistor? Anyone have the schematic/pinouts for the mono coil?

[WM6]

I've heard the the Infinium coils had two coils even on their mono? Can anyone confirm that. On the DD coil, is the black coil the transmit because of the damping resistor? Anyone have the schematic/pinouts for the mono coil?

Two (or even more) coils can still be connected as mono (in spiral coil manner).

On DD PI coil, you do not need damping resistor on TX, but on RX coil.

I am interesting in pinuots scheme for Infinium mono coil too.