If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
Announcement
Collapse
No announcement yet.
Deep Force by Mikron Bulgaria - A new PTS Hybrid 2025
Hi Hristo,
If the cells are PANASONIC MH12210 type (as viewing on the picture), the capacity is 2.9AHs (according the datasheet) and if the power supply DC source is 5V 0.5A (popular cheap USB charge AC/DC charger), and if the second additional DC/DC adapter haves 100% efficiency, the time for full charge of all 4 pcs LiPo accus have to be 2.9AHs/0.125A = 23.2hours. It is too much time to charge if you want to use the unit for the next day. The optimum solution of the power supply is one of the hardest task in every electronic unit. In this case, the more good solution is to use 24V AC/DC adapter for charge these 4pcs. LiPo accus in reasonable time with according charge solution.
Hello Detectorist#1
Hristo is sick - you twice.
Check your watchlists.
Tweet
Comment