NEW PROGRAM ARDUINO MEGA 2560

[pourang]

HI ALL
NEW PROGRAM ARDUINO MEGA 2560 AND ARDUINO NANO AND ...: CONNECT ALL SOFTWARE OKM
MY SOFTWARE BEST AS OKM
MY SOFTWARE REAL WORK
my software work fluxgate flc100 and etc sensor analog and digital

http://www.megafileupload.com/ak0v/Mega2560_R3_Label-small-v2.png

[pourang]

C CONTROLLER AND SOURCE

[ivconic]

DCF77 ??
What is that for?
Locating long waves?
Is it only magnetometer or ulf locator too in the same package?

[bernte_one]

DCF77 ??
What is that for?
Locating long waves?
Is it only magnetometer or ulf locator too in the same package?

maybe for this

http://www.friese-electronic.de/uploads/ortung/lf-vlf-tf/einfuehrung/sekundaerfeld.jpg

http://www.friese-electronic.de/uploads/ortung/lf-vlf-tf/einfuehrung/spannungspegelverlauf.jpg

or simple to add a real clock Timing to the Magnetometer data logger?

[ivconic]

maybe for this

http://www.friese-electronic.de/uploads/ortung/lf-vlf-tf/einfuehrung/sekundaerfeld.jpg

http://www.friese-electronic.de/uploads/ortung/lf-vlf-tf/einfuehrung/spannungspegelverlauf.jpg

or simple to add a real clock Timing to the Magnetometer data logger?

[pourang]

You can made 3d metaldetector by arduino mega2560 and Arduino nano and...just writing source.You need source. And made better than as okm.ardunio. Mega2560.and all ardunio working fluxigate flc100.So you can made 3d metal detector and use okm software ( future 2003_2005 .and visualizer 3d)

[ivconic]

You can made 3d metaldetector by arduino mega2560 and Arduino nano and...just writing source.You need source. And made better than as okm.ardunio. Mega2560.and all ardunio working fluxigate flc100.So you can made 3d metal detector and use okm software ( future 2003_2005 .and visualizer 3d)

DCF77 ??

[wtrk]

I have this one and its special designed for me from my friend.
This main card is not arduino, its conrad and you need eproom hex code for this.

[ivconic]

I have this one and its special designed for me from my friend.
This main card is not arduino, its conrad and you need eproom hex code for this.

Obviously not; it is based on Motorola MCU.
...
Here is how it looks like, here are my Arduino's; 2 x MEGA2560 and one UNO...

[drlogin]

what data format will send from arduino to uture 2003_2005 .and visualizer 3d can you share data file example or how grids works and distance can send out from arduino

[ivconic]

Yes it is C-Control (CONRAD-Control) board based on Motorola ZC441199FN MCU.
Produced since 1997 as module series and sold in different variations.
It possible that there is variation with AVR MCU also, but that one showed on photos above is obviously Motorola ZC441199FN MCU and it can't be called "Arduino".
In many aspects however it resembles on Arduino.
That's really not important here, i only wanted to hear about DCF77 option and how it is used in particular setup.

[pourang]

i made 3d metal detector by fluxgate magnetometer and working visualizer 3d i made by arduino and working all software 3d okm.. ha ha ha very very good work.
my source very very good working. very very good


[ATTACH]35223[/ATTACH





just writing program(source) ...... programing arduino ...

[wtrk]

i made 3d metal detector by fluxgate magnetometer and working visualizer 3d i made by arduino and working all software 3d okm
[ATTACH]35222[/ATTACH]
[ATTACH]35223[/ATTACH
[ATTACH]35224[/ATTACH]
[ATTACH]35225[/ATTACH]
[ATTACH]35226[/ATTACH]


just writing program ...... programing arduino ...

Do you have Future 2005 hex code for eproom ?

[pourang]

no .hex future 2005.
you writing source but not work OKM.
okm just a toy

[wtrk]

no .hex future 2005.
you writing source but not work OKM.
okm just a toy

Do you have programming code for arduino ?