But i am afraid that at field you will not be able to detect an object with only 17Hz change at frequency. When you are moving there are big changes from the magnetic field.
Anyway, you constructed something very good.
-
Congratulation Orbit.
But i am afraid that at field you will not be able to detect an object with only 17Hz change at frequency. When you are moving there are big changes from the magnetic field.
Anyway, you constructed something very good.
-
iron 150gr fgm 3 two meters and twenty - iron 150gr -
flc 100 fifty centimeters
Leave a comment:
-
Yesterday i tried 2 FGM3 sensors. I put them at the same place with the same direction, i suplied them and measured the frequency. What i saw ..... look
The first was oscillated at 100.2khz and the second at 101.5 khz. There is 1.3 khz difference, so how i can null if i will use them at Carl's gradiometer???
For everyone who want to construct the gradiometer, must check the sensors if they work at exactly same frequency
Regards
Leave a comment:
-
vitrovac and 4 sensors on the picture of the tables as you know !!!!
And the second picture is my sensor is made but not with this material who supplies what is your picture on the left and the material in the left image but not at all vitrovac mumetal, and on my sensor as used by the kernel real vitrovac !!!
Left picture you sent me privately it is these miki ,I wrote a in terms of what people do, and I appropriated your picture as my !!!
and I will ask to look real vitrovac vitroperm or, if you care about that!Leave a comment:
-
why any work I see in forum making so unintelligently and so unaccurately? do you know what you did get NOTHING of useful info? you have only killed this sensor, wasted a time and your moneyfgm3 original sensor resin removed - and vitrovac !!
Leave a comment:
Leave a comment: