felezjoo PI(the best pulse induction metal detector that I made until now)

[bandito]

PCB here

http://www.ebay.it/itm/232343741231?

[samii]

Hi
download this ;

http://rlangoy.github.io/Arduino-Uno-Uploader-Tool/

[Emiliano_070]

Hi fellows. You could teach how to program atmega with arduino.Thanks

[6666]

Some of the 1/4 and 1/2 watt resistors have a 250 volt working voltage. Would it be a good idea to series 2 or 3 resistors to get the correct ohms and watts when the peak voltage is over 250 volts or is the high voltage spike so short that it doesn't matter?

Yes its always a good idea to run components within specs so with a typical PI flyback voltage of about ~400 volts 2 or more in series will over come the break down problem,
I find that excessive heat kills resistors , at least with my projects, so building for power so they don't run too hot is also important .

[cakalist]

100 ohm resistor to connect 180 ohm series

[cakalist]

best hex kodu version ?

[Sezayi]

Felezjoo v3_05 hex code error ...Do you have a running v3_05 hex

[green]

You can build the resistor buy parallel and series resistors to get the needed wattage

Some of the 1/4 and 1/2 watt resistors have a 250 volt working voltage. Would it be a good idea to series 2 or 3 resistors to get the correct ohms and watts when the peak voltage is over 250 volts or is the high voltage spike so short that it doesn't matter?

[ripsdevala]

You can build the resistor buy parallel and series resistors to get the needed wattage

Good idea, never flash in my mind . Thanks

[Sezayi]

i need hex files but it shouldn't counter. if you have hex files can u send me ?

[6666]

What if i use 0.5 watt 390 ohm 1% resistor for the damping ,is there will any problem? Cant find 1% for higher watt.

You can build the resistor buy parallel and series resistors to get the needed wattage

[leopard70]

felezjoo pi - part list.pdf Pay attention on marked part.GOOD LUCK!

[ripsdevala]

What if i use 0.5 watt 390 ohm 1% resistor for the damping ,is there will any problem? Cant find 1% for higher watt.

[lc516]

YES, I'll do it.

Thanks!

[basellafe]

maybe its a fake but you should give a try