HELLO CARL :) recommendation please?

[Bhathu saaii]

Lidar data for the area you want to search would be killer. With the vegitation removed you can see some very old disturbances in the soil. Old foundations roads trails anything that changes surface terrain.

https://carsulidar1.wordpress.com/about/project-description-and-objectives/

maybe start here.

Thank you for the idea. But i think lidar is used to trace pathways and road trails..
It also one of the helpful application to be used in TH..do we have available LiDAR here in the philippines? How much would it cost? Thank you..

[Bhathu saaii]

Haha, this is the full gold-trap now for you, bhathu. Not funny.

First you'll think that the gold is worth the invest (lets say 10.000 dollars) and then you might
run into big troubles without end if you're not really lucky and find gold for 100.000 dollars.

Main question:
How large is the nearest to ground surface of the chest or plate or whatever -
are the gold bars flat one next to another and cover a larger area?!

In air I can detect a 45x35cm alu case @ 2m. with 45cm DD-coil (JeoHunter).
So this is not the problem with even 1m IB coil, the finds surface is the problem.

If the gold is 2m deep inside an aluminium-chest 50x50x50cm you can detect
it because the contrast to mineralization is much higher as in rusty iron chest.

But 2 meter is no childsplay - even if you would detect a buried tank! *laugh*

Best bet is by surface-anomalies (you can see that someone did bury something
at a certain place) and then use magnetometer and excavator to find it.
Means you pretty exactly must not the place. As long as there are no mine-traps. :-D

I think its not a trap..just an air test demonstration.nothings wrong with it..but we always know that the air test is far different from the ground test..

WE ACTUALLY DONT KNOW. No one knows except for the actuals maps being left by the japanese battalion..thats the buggest clue to answer that question..but lucky if you have that map..
We dont have a map, we're just relying on the treasure signs,markers,codes being left and made by japanese engineering battalion..

Yes. But gold bard are stored in treasure box/chest.cemented treasure vaults.gold coins and jewelries are stored in the jar and small drum..they are being coated by asphalt..

I agree with you
What would be the best magnetometer can be found here? I mean effective and most used by hunters here?

[Bhathu saaii]

2 meters range is not difficult if you used 1x1 meter coil even felezjoo can do it, but on stability its hard to find a good one
My felezjoo video with 20x30cm PCB at several feet.
https://www.youtube.com/watch?v=lNraHpZr-sQ

Thank you bro..ill make it..i will look for the complete files here..from parts to pcb layout and coild..
Anyway,the result in the actual field is better? Coz other MD is advertising their product but it didnt worked as expected..

[Bhathu saaii]

Hi Bhathu saaii

do you have some google earth picture of the area or the google maps link with coordinates?!

If "your" area with the finds really is that small you have 3 options:

- excavator - remove 1m layer of soil
- GPR - ground penetrating radar - look very carefully for anomalies
- you and a second person (if you can trust it) with DeepHunter and 1 meter coil

Buying cheap chinese plagiate detectors might not be the best option.
These things look nice but the depth is just around 70% compared with the originals.
You can get something really deep for a super price but you also may get junk.
It's rather some game of luck and don't rely on warranty etc.

And sorry my friend, but don't be too optimistical, otherwise you might just get frustrated.
This whole treasure-hunting stuff is some philosophy on itself and either you become
used to it or you might fail and just waste a lot of time, money, efforts and perhaps even
your life if there are greedy and brutal guys around, who wanna have a piece of the cake.

Your best bet will be if you can narrow down the hunting-area because with 2 meters depth
otherwise your chances are pretty low, especially if you wanna do this alone.

But I wish you good luck - because I always like treasure-hunting success!
And I know what is success - hell, I know it too good.
The real success are no treasures but a really enjoyable state of mind - ALWAYS! :-)
Perhaps I should check out some cute Pina babe for having a lot of fun !!! ;-)

Hi Bhathu saaii

do you have some google earth picture of the area or the google maps link with coordinates?!

If "your" area with the finds really is that small you have 3 options:

- excavator - remove 1m layer of soil
- GPR - ground penetrating radar - look very carefully for anomalies
- you and a second person (if you can trust it) with DeepHunter and 1 meter coil

Buying cheap chinese plagiate detectors might not be the best option.
These things look nice but the depth is just around 70% compared with the originals.
You can get something really deep for a super price but you also may get junk.
It's rather some game of luck and don't rely on warranty etc.

And sorry my friend, but don't be too optimistical, otherwise you might just get frustrated.
This whole treasure-hunting stuff is some philosophy on itself and either you become
used to it or you might fail and just waste a lot of time, money, efforts and perhaps even
your life if there are greedy and brutal guys around, who wanna have a piece of the cake.

Your best bet will be if you can narrow down the hunting-area because with 2 meters depth
otherwise your chances are pretty low, especially if you wanna do this alone.

But I wish you good luck - because I always like treasure-hunting success!
And I know what is success - hell, I know it too good.
The real success are no treasures but a really enjoyable state of mind - ALWAYS! :-)
Perhaps I should check out some cute Pina babe for having a lot of fun !!! ;-)

Its easy to produce the map and the coordinates using google earth app.

I think GPR would be the good answer for it though GPR cost a lot..its too expensive for us..hoping to buy it sooner or later..we dont have a plan to buy on chinese product coz its useless. I know.

Hahaha thanks a lot my friend. Im not that optimistic. Its just my hobby. Im too dedicated to work for this hobby but i dont have that much of time because i have a job for a living.

I agree with you. Thats why im with the people who can be trusted. But i dont give the whole trust. I pray from above whenever the blessing is in our front,no one would change their minds. Coz its more hotter than money.

Anyway,im gping to make this for a shallow depth deposite only. But for the deep deposite i guess GPR would be great or ERM like accumeter.

Thanks a lot
! I do agree! so enjoyable

[godigit1]

What means lidar data - leak data?

Lidar is lazar imaging of the ground structure. It removes the vegitation from the surface so you can see the ground in much more detail.

For most places if done at all its probably propriatory info unless the study is made public.

In my area a new lidar has been done that is interactive like Google earth and you can shade in topos or whatever base imagry map you want.
Ive been into a remote known gold area twice in the past and not been able to find the diggings.

Now with the Lidar I can see why. The forest service or blm of land owner someone flattened out all the tailings with a dozer. I walked through the spot twice before if there was no meadow grasses I would have noticed it. Lidar has shown me many interesting things so far.
Its funny people who have there houses removed from Google earth. Ha Ha I can see your foundation. and layer you in!!!! not that I care too, paranoid people anyway what are they hiding another Jacee Dugard.
She was taken 30 minutes from my house I remembered it as a kid it was a shock for the community it was mind blowing when they found her.

As far as gold in the Philippines i have not researched it but from what I understand it was hidden by the goverment then picked up after the war they knew exactly where they hid the stuff.
The guy Im renovating for now collects coins and has coins that were recovered from the ocean many years later by the military. Maybe private moneys could be burried but dont think the goverment forgot anything.

[Funfinder]

There is always the trail of money and personal lust-lucrativity from where
you can find out the (formerly) motivations of people but more important now:

There is the trail of informations which motivates a treasure-hunter becoming active !!!

What you do if the treasure-rumors are just lies and many others are following such
false leads already ?!? Motivations spreaded perhaps even by those who just wanna
sell their equipment? *laugh* OK, for luck most of the time this is not the case but
with treasure-hunts you have to be careful!

Those fools at Oak Island are sponsored by 1.500.000 dollars of TV-investments
per year, which shall come back through enough hype and advertising-income.
They could go all home into their own dreamworlds without all this "fake"-push!
They not even found something with the most expensive PI with 1m coil for
10.000 dollars at this artificial swamp at Oak Islands. *laugh* Such Sh*t-show!


What means lidar data - leak data?

Anyway, either he can verify the informations-source seriousity and that there are
real special ground-disturbances or he is lost because 2 meter is more
than heavy to detect, especially cause he's a total newbie to this stuff.

I've detected already in 2010 80cm deep cannonballs and 1m deep steel-stems.
I know how this deep search works because I love it and I have a lot experience.

I can even feel from the detection-distance-coil-sphere the depth and size.
Because a larger object creates a half detection-globe over the ground.

But for very deep objects you can be happy if you get a fainting signal at all.

[godigit1]

Lidar data for the area you want to search would be killer. With the vegitation removed you can see some very old disturbances in the soil. Old foundations roads trails anything that changes surface terrain.

https://carsulidar1.wordpress.com/about/project-description-and-objectives/

maybe start here.

[Funfinder]

Haha, this is the full gold-trap now for you, bhathu. Not funny.

First you'll think that the gold is worth the invest (lets say 10.000 dollars) and then you might
run into big troubles without end if you're not really lucky and find gold for 100.000 dollars.

Main question:
How large is the nearest to ground surface of the chest or plate or whatever -
are the gold bars flat one next to another and cover a larger area?!

In air I can detect a 45x35cm alu case @ 2m. with 45cm DD-coil (JeoHunter).
So this is not the problem with even 1m IB coil, the finds surface is the problem.

If the gold is 2m deep inside an aluminium-chest 50x50x50cm you can detect
it because the contrast to mineralization is much higher as in rusty iron chest.

But 2 meter is no childsplay - even if you would detect a buried tank! *laugh*

Best bet is by surface-anomalies (you can see that someone did bury something
at a certain place) and then use magnetometer and excavator to find it.
Means you pretty exactly must not the place. As long as there are no mine-traps. :-D

[RS_Phil]

2 meters range is not difficult if you used 1x1 meter coil even felezjoo can do it, but on stability its hard to find a good one
My felezjoo video with 20x30cm PCB at several feet.

https://www.youtube.com/watch?v=lNraHpZr-sQ

[Funfinder]

Hello bro. Not just an island. Our entire country and every 7,100 or more island have treasure deposites CIA knows that..

Anyway,i think its larger than that..but we also have a site that is around 5x5meters target area..that is in the middle of two creek and the one creek is a man made..

Ithink the soil doesnt have any junk because it is a rural area.. no one goes there and if you metal detector sound and reacts,meaning there is something underneath that area..either an AU bar or landmine hehehe last week relatives of my friend found 6 AU bars with 1 kilo each..

Hi Bhathu saaii

do you have some google earth picture of the area or the google maps link with coordinates?!

If "your" area with the finds really is that small you have 3 options:

- excavator - remove 1m layer of soil
- GPR - ground penetrating radar - look very carefully for anomalies
- you and a second person (if you can trust it) with DeepHunter and 1 meter coil

Buying cheap chinese plagiate detectors might not be the best option.
These things look nice but the depth is just around 70% compared with the originals.
You can get something really deep for a super price but you also may get junk.
It's rather some game of luck and don't rely on warranty etc.

And sorry my friend, but don't be too optimistical, otherwise you might just get frustrated.
This whole treasure-hunting stuff is some philosophy on itself and either you become
used to it or you might fail and just waste a lot of time, money, efforts and perhaps even
your life if there are greedy and brutal guys around, who wanna have a piece of the cake.

Your best bet will be if you can narrow down the hunting-area because with 2 meters depth
otherwise your chances are pretty low, especially if you wanna do this alone.

But I wish you good luck - because I always like treasure-hunting success!
And I know what is success - hell, I know it too good.
The real success are no treasures but a really enjoyable state of mind - ALWAYS! :-)
Perhaps I should check out some cute Pina babe for having a lot of fun !!! ;-)

[Bhathu saaii]

sorry DP3 is not my matter. you have to ask under youtube video you see/found up.

Oh. Sorry. What is your specialty? DP?

[kt315]

sorry DP3 is not my matter. you have to ask under youtube video you see/found up.

[Bhathu saaii]

you can see i get requests on pcbs again and again. while whole batch was released.
those guys sure KNOW what they need.

HUGE THANK WHOM ARE SUPPORTING MY FUTURE PROJECTS.

[ATTACH]47344[/ATTACH]

DP3 can detect deposite from 2meters or more with huge coil.right?

[Bhathu saaii]

you can look a work of the detector in a field and take your decision What To Do. there are millions of videos.
DP is worldwide leader on working prototypes. chinese guys got from me gerber files and China will manufacture DP in millions copies
for lowest price.
https://www.youtube.com/results?sear...pulse+detector

Thanks a lot ������ ill try to purchase parts of the delta pulse and make a coil..

[kt315]

you can see i get requests on pcbs again and again. while whole batch was released.
those guys sure KNOW what they need.

HUGE THANK WHOM ARE SUPPORTING MY FUTURE PROJECTS.