Delta Pulse

[kt315]

I did response on the diode 100s times. why you ask me again?
diodes for Delta.rar

[medj]

http://www.up-00.com/?j1FH

http://www.up-00.com/VhUvoBVc

Hardware problem
Ring only
coil 0.7 28 turn 40cm

[mohandes]

do not know what you mean under "pump load". can you give a schematic?



you need in the diode if do deeper machine. if use BIG pulse WIDTH. anotherway do not use it! do not use it in - baracuda, hammerhead, surf, etc.
do not use it for money hunting in ordinary non-deepers detector with 50-100usec PULSE WIDTH!

ok
for finall fast diode is good or no ? Explain me for small and big metal
can i use uf4007 or MR856 ?
regards


AND i say thanks my friend Jose:
i make this board .
Auto mode better or Manual mode better ? bicause this pcb just have auto mode

regards

[kt315]

KT315 which PCB have you ordered ?

this PCB is bulgarian two-sided design you see in forum. files in P-CAD 2006 will be included in DVD everyone will get with the board FOR FREE. as I promised!

[6666]

KT315 which PCB have you ordered ?

[mohandes]

hi
i finish third delta
i want use uf4007 or MR856 instead of STTH1210D , it is ok ?
and for improve detect for gold , change value R7 & R8 and... ,please tell me for increase gold detecting
and irf740 better or irf 840 ?
and guide more about coil
regards

[kt315]

just got a response.

sabrina.xu

Good Morning. Happy new year in 2014!

Sorry for the late contact.

We are back from holiday already, your boards will be shipped out today.

Please check below invoice.

Thanks for your order.

Any question, please free to let me know.

2014-02-13


Cheers
Sales department: Sabrina.Xu
PCBSourcing.co.ltd
*************************************
Our Office address change to: Room507,Building212,Tairan Industrial Park, Futian District,Shenzhen, China 518040

Tel:+86-755-82787387
Fax:+86-755-82737260
MOB:+86 15002080179
URL:www.pcbsourcing.com http://www.pcb-board-cn.com
Skype: pcbsourcing-b MSN: [email protected]
************************************************** ***************************

[kt315]

too much delay on ordering because 'china holiday'. a delivery has to wait on Feb 12.

Dear Anatolij,

Thanks for your bank slip.
We have received your payment! Thanks!

Today, we will arrange production, if any EQ, our engineer Roger will contact you.

Btw, since we will have China New Year holiday from 25th of Jan.-8th of Feb., May i know will you accept if we ship out boards after holiday?? I think delivery date will be around 12th of Feb., Is it ok for you???
We will try best to deliver earlier as we can!

2014-01-22

Dear Customers, Our Spring Festival will coming soon, our factory will be closed around 25th of Jan.-10th of Feb., Any urgent order especially multi-layer board is not possible for us to deliver before holiday. Please understand!

[Speedy_G]

Checksum 'corrections' to the Geotech 1 TeknolojiEkibi Demo hex file

Hi Orbit

I have made some 'checksum corrections' to your Geotech 1 TeknolojiEkibi Demo hex file you uploaded previously.
I have also added an 'extra code line 7 which was missing'. Now the Demo file shows no errors on Simulation with the PIC18 Simulator IDE program.

Sorry, I could not upload the text file, so I've attached a jpeg of the 'corrections' which all occur within the first 18 lines.
Just duplicate the highlighted sections into the hex file you uploaded.



Please test it to confirm this.
Hope this helps someone with their simulations.


Thanks

Ciao

Speedy_G

[Orbit]

Ok Speedy-G !

[Speedy_G]

Hi Orbit

I have made some 'checksum corrections' to your Geotech 1 TeknolojiEkibi Demo hex file you uploaded previously.
I have also added an 'extra code line 70 which was missing'. Now the Demo file shows no errors on Simulation with the PIC18 Simulator IDE program.
Please test it to confirm this.
Hope this helps someone with their simulations.

Thanks

Ciao

Speedy_G

[kt315]

pegion, youtube has much video on DP.

[Nicolas]

hi ALL

help me please

thank you

Hi

KT315 said this

I remember this mod, have checked it... did not see something specific in stability increasing.

[pigeon]

hi ALL

help me please

thank you

HI ALL
this modification is correct

thank you

best time
P.[ATTACH]27924[/ATTACH]

[pigeon]

HI ALL
this modification is correct

thank you

best time
P.