two box

[MartyJ1963]

TR Locator Redrawn

Hi all. Can someone please be kind enough to check my layout for any mistakes,,,,appreciation in advance. Regards, Marty.

[MartyJ1963]

@Rajesh,,,Thanks. Regards, Marty

[rajesh]

Hiya Pidgeon, Do you have a parts list and wiring diagram available to share for your design please? Regards, Marty.

[MartyJ1963]

Hiya Pidgeon, Do you have a parts list and wiring diagram available to share for your design please? Regards, Marty.

[rajesh]

hi friends

i search pcb in pdf version .

thank you

hi any one has tiny coil configuration of this locator

[bernte_one]

The problem was solved.

can you tell how?

[fmnotes]

The problem was solved.

[fmnotes]

Hi to all . I just assembled the board with all the materials. I want your help, those who know to help me. Q4 is heated by the transmitter, Is it normal or not? Also the crystal oscillates normally it also gives me 2.05 kHz output but from the r5 resistance Up to the coil after the transistors there is no oscillation frequency is this normal? The receiver from what I see works normally, but the transmitter I do not know if it works normally. I would ask anyone who knows to help me and tell me What I can do to make this machine work normally. In my tests I use a coil wrapped in ferrite. Thanks

[kt315]

sevzirfo is seeking at x-Finland land. you perhaps know that part of Finland territory was been taken by Stalin and now it is under Russia.
Vyborg is former Finland city.

[6666]

please less requests on result and more about your job process/progress from your side. http://sevzirfo.narod.ru/nahodkideep.htm

Gee Kt315 thats scary stuff, yesterday two men one Australian and one British, were killed on the Solomon Islands working to remove undetonated wartime explosives, The Solomon Islands is littered with undetonated explosives – (UXO) – from World War II.

[fmnotes]

All I have :

https://drive.google.com/file/d/1wRn...ew?usp=sharing

Thank you very much for the answer. I will start building this detector.

[berreizeta]

All I have :

https://drive.google.com/file/d/1wRn...ew?usp=sharing

[kt315]

please less requests on result and more about your job process/progress from your side. http://sevzirfo.narod.ru/nahodkideep.htm

[fmnotes]

Hi to all.
Does this machine work properly or not. Is it worth building? Whoever made it please let us know the result.
thanks..

[zakari]

HI ALL
BERREIZETA

CAN YOU PUT DATA OF COILES(OHMS &NUMBER OF ROUNDS)
THANK YOU