Fortune-M

[ivconic]

I bought a board from the author for the Fortune M3 version some time ago, had no time to finish it yet.

If i am not wrong; at the beginning it was "Soha" and later evolute to "Fortune" ?
There were at least 4-5 variations and versions of both, spread on Russian forums.
There is also a free code for diyers. Several revisions.
Last year and maybe a bit earlier i started to diy "Soha 3TD-M" but in meantime i lost all the interest.
Still having some parts here on a pile.
If i understood correctly the authors articles at the time; it has pretty nice functions in code.
It displays residual voltage on LCD as well as few other interesting data, directly from coil.
So i was planning to make "an instrument" from it, which i will later use in coil balancing procedures.
But by now it is left aside. Will see...

[eclipse]

I bought a board from the author for the Fortune M3 version some time ago, had no time to finish it yet.

[ivconic]

Funny fact; you haven't missed to adjust GEB at third detector? How come?




P.S.
Usual "spinning", so many times seen so far on similar video demonstrations.
In shorter words; your video proves NOTHING and your video is total RUBBISH!

'scuse me on my French!

[ivconic]

hello

https://www.youtube.com/watch?v=kKYZejLmY_w

I watched your video with attention.
Great MISTAKE you are making all the time!
You haven't adjusted GEB at Fisher CZ3D neither at White's XL Pro!
Especially at White's XL Pro that mistake is so visible, when coil is above the hole; treshold immediately disappears and signal goes to "negative" under the Disc level.
Of course it will not produce any kind of reaction like that!
Same thing with Fisher CZ3D.
I am 101% sure, also i am ready to put $$$ bet on both; Fisher CZ3D and XL Pro that those will literally eat most of the coins you showed at that depth and in that hole.
You only need to understand a bit how those metal detectors works and how to adjust them.

[roccocoin]

bought fortune-m kit, box \ control + plate sisko bulgaria.
great metal for highly mineralized soils 94% of mineralization in Italy.

[roccocoin]

hello

https://www.youtube.com/watch?v=kKYZejLmY_w

[bandito]

there is a ready project for sale

http://www.ebay.it/itm/232112729898?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

[reptooyep]

Hi,
I found the author's link with all you need to build this great designed detector :

https://drive.google.com/open?id=0B6AYE8Mz_7rObm1zOVZUalFzRTA

[TreasureHunter]

Hello everyone!

How is this project going? What are the latest improvements?

TH

[bernte_one]

yes you are right, have seen this before but wasn´t sure if it is from author or from pcb manufacturer

[kt315]

ozzy did reply his email address at board is effective. a payment via paypal will be more on 1,33 times just cause the fee.

[kt315]

hello kt315

did you have the e-mail contact from seller?

BOOM. is the written e-mail address as silked mask at the board (pics above I putted) so unfair?
additionally will ask him although.

[bernte_one]

hello kt315

did you have the e-mail contact from seller?

[kt315]

speedy googletranslated.

Selling board MD Fortume-M ver 0.3
Features:

• stabilizers choice: LD1117 or LM2940
• parallel mosfet protection diode is added to reduce losses.
• Under the housing Z80.
• "Rectified" socket programming, no need to cross the wires from PicKit3
• Input capacitor smd cause interference with fur. replaced by WIMA MKS2 impact or the like
• The ability (who need) installation DC-DC converter on LM2731X to power a lithium-ion battery. (Work DC-DC converter has not yet been extensively tested)

The board tested, no errors.
Here's a sample collected without a DC-DC converter.

Description Offline author http://alltech.at.ua/forum/3-10-1

Price 8 USD (to 04.04 - 200 UAH) for Ukraine + Your shipping.
For other countries 13 USD including shipping.
Who with soldered processor and programmed + 6 USD

Verkauf von Bord MD Fortume-M ver 0.3
Eigenschaften:

• Stabilisatoren Wahl: LD1117 oder LM2940
• parallel MOSFET-Schutzdiode wird hinzugefügt, um Verluste zu reduzieren.
• Unter dem Gehäuse Z80.
• "Gleichgerichtete" Socket-Programmierung, keine Notwendigkeit, die Drähte von PICKIT3 überqueren
• Eingangskondensator smd Ursache Interferenzen mit Fell. von WIMA MKS2 Stoß oder dergleichen ersetzt
• Die Möglichkeit (der Notwendigkeit) Installation DC-DC-Wandler auf LM2731X einen Lithium-Ionen-Batterieleistung. (Work DC-DC-Wandler noch nicht ausgiebig getestet)

Das Board getestet, keine Fehler.
Hier ist ein Beispiel ohne einen DC-DC-Wandler gesammelt.

Beschreibung Offline Nutzer http://alltech.at.ua/forum/3-10-1

Preis 8 USD (bis 04.04 - 200 UAH) für die Ukraine + Ihre Versandkosten.
Für andere Länder 13 USD inklusive Versand.
Wer mit gelöteten Prozessor und programmiert + 6 USD

[scarface]

-maybe it help.i think this the guy who builb first project (coxa/fortune)

https://www.youtube.com/user/barssimf/videos