Tesoro Toltec 100 schematic and adjustment?

[Max]

Well I think I'm done. Here is Rev1 of my Toltec 100 schematic. Please remember that I started from nothing so the IC numbers(and transistor numbers) on the drawing were assigned by me and may or may not agree with other schematics for this machine. Please feel free to point out any mistakes and I will correct and repost. Also, I have the original manual which I will try to get scanned in and post.

Enjoy,
Merc

Hi Merc,
nice to see it completed. Thanks.

I found an error: cap at RX coil is 0.015uF = 15nF not 0.015pF as in drawing.
I suppose cap at RX preamp is 5pF but maybe on Toltec100 it's 8pF : have you measured it out of circuit ?

Best regards,
Max

[porkluvr]

What a job.

Thanks, Merc.
It is obvious than an incredible amount of work went into that. We owe you a debt of gratitude. If I had any hair it would all turn grey just looking at it!!

Just kidding, but I have to close my eyes before I blow a headgasket.

[Merc]

And here's the manual.

I had to break-up the manual into several pieces due to file size limitations.

[Merc]

Finally

Well I think I'm done. Here is Rev1 of my Toltec 100 schematic. Please remember that I started from nothing so the IC numbers(and transistor numbers) on the drawing were assigned by me and may or may not agree with other schematics for this machine. Please feel free to point out any mistakes and I will correct and repost. Also, I have the original manual which I will try to get scanned in and post.

Enjoy,
Merc

[Esteban]

OK,

I expect this can work with the same TGS coils.

[roberts]

!

Thanks!

[Esteban]

Deep Search IV

No very bad I'm, so go the Tesoro Deep Search IV.

[roberts]

tt

[quote=Esteban;59987]Northerntrowel, I email you.

*********

He dont like to publish very old schematic why?
may be he will produce it?
here it is Toltec80 very close to 100

No, Merc is drawing it with much effort.

*********


Roberts (RObert), I can email you if you provide me an email.

Thanks in advance if you send it!
My e-mail is [email protected]
But it would be more FAIR if you already posted it here, so everybody else can see it. Also less effort for you.
Regards!

[Esteban]

Northerntrowel, I email you.

*********

He dont like to publish very old schematic why?
may be he will produce it?
here it is Toltec80 very close to 100

No, Merc is drawing it with much effort.

*********


Roberts (RObert), I can email you if you provide me an email.

Regards

Esteban

[Northerntrowel]

Hi! Esteban

Can you send me the schematic ?! S.V.P

Many Thanks!!!

My email:
[email protected]

[rumensat]

He dont like to publish very old schematic why?
may be he will produce it?
here it is Toltec80 very close to 100

[roberts]

?

Esteban, so you practically saying that you have schematic and dont want to post here??? Why?
So many people already posted various schematics: traced,originals,draws...
It is a kind disrespectfull to this forum, isnt it?
After this obvious disrespect i wouldnt appear here any more, if i were you!
And you are talking about something....?
Not good! Not nice!
Not regarded!

[Esteban]

Qiaozhi,

OK, enjoy!

[Qiaozhi]

Qiaozhi,

I email you and can email others who wants it. Merc is doing a great job tracing the schematic. If I post, I'm the killjoy. I hear a "voice of conscience" (a friend).

Regards

Esteban

Thanks Esteban!

[Esteban]

Qiaozhi,

I email you and can email others who wants it. Merc is doing a great job tracing the schematic. If I post, I'm the killjoy. I hear a "voice of conscience" (a friend).

Regards

Esteban