Announcement

Collapse
No announcement yet.

VLF MD (by Sascho - Varna)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • dfbowers
    replied
    Worthwhile project?

    Hello,

    Has anyone out there built this project? I have seen it posted here and elsewhere and it looks like it may be an easy project for the amature (like myself). Other than having to translate Russian it looks like someone did a good job with making the schematic easy to read.



    Thanks.
    Don

    Leave a comment:


  • aft_72005
    replied
    Originally posted by hobbes_lives View Post
    Nice work AFT.
    hobbes_lives
    Thanks for your assessment .
    Best regards

    Leave a comment:


  • hobbes_lives
    replied
    Nice work AFT.

    Leave a comment:


  • Unregistered
    Guest replied
    Search coil can be easily compensated in phase and amplitude.
    like schematic http://www.geotech1.com/forums/showthread.php?t=13087
    Metal detector with meter discriminating
    c4,r50,p1-phase
    c5,r3=47k,p2-amplitud
    A little more plate; p1 and p2-trimmer.
    Achieves the minimum signal.

    Leave a comment:


  • aft_72005
    replied
    Originally posted by Pompey View Post
    Yes,this schematic is very nice and well working.I was made a little mistake with audio part -transistors and there was less sensitivity,but now everything is OK .Detector is very sensitive and easy to adjust ..


    Hi Pompey
    I don’t have free time for testing circuit now ,
    And believed what’s Sascho said about this circuit , I am interest
    Know your test result .
    Are you test it on the ground?
    And deep on the ground?
    Please more explain about air test with 1 euro coin ?
    Is discrimination good ?
    Is ground balance work true?
    Best regards.

    Leave a comment:


  • Pompey
    replied
    Yes,this schematic is very nice and well working.I was made a little mistake with audio part -transistors and there was less sensitivity,but now everything is OK .Detector is very sensitive and easy to adjust ..

    Leave a comment:


  • Unregistered
    Guest replied
    Excelent work Aft....
    Dont listen to the turkish!
    I made it work more than good.Wasnt able to made proper coil then.
    But wit average test coil showed very good behaviour.
    So if you tune it right you will see for yurself.
    Can you share those changes you made to the PCB?

    keep on ................................................. detecting

    Leave a comment:


  • Unregistered
    Guest replied
    Сашо,при върнат докрай трешолд трябва ли да се чува тих фонов звук в слушалките?

    Leave a comment:


  • aft_72005
    replied
    Hi to all
    Although Turkish guys at Turkish website said that this circuit without success
    And didn’t work truly.
    But I believe Sascho and decided try it again by myself.
    Thus built PCB of the "best vlf detector" and montage it. I apply some alter
    To Leto PCB . omitted two big wire jump and other changes.
    Not test it yet. I am saying more afterwards.
    Best regards.
    Attached Files

    Leave a comment:


  • humhum
    replied
    Originally posted by erolunall View Post
    Hello




    some schematics including Varna VLF

    Best Wishes
    Erol

    EROL bey, your link is death.

    Leave a comment:


  • Unregistered
    Guest replied
    Originally posted by Unregistered View Post
    Niakoi testva li shemata na poleto?Kak hvashta 1lv v zemqta?
    Did someone test this schematic in the field?How deep it detects 1 euro?

    Leave a comment:


  • Unregistered
    Guest replied
    Niakoi testva li shemata na poleto?Kak hvashta 1lv v zemqta?

    Leave a comment:


  • Unregistered
    Guest replied
    Originally posted by gordianus View Post
    golegi
    ai stiga

    Leave a comment:


  • aft_72005
    replied
    Hi Leto
    Please say me about your final test with this detector ?
    How many deep in air for 2 centimeter coin ?
    Is it stable working?
    Best regards .

    Leave a comment:


  • sonar
    replied
    I have some free time and I analyze that - its some pics from me:




    maybe its usefull for someone

    Leave a comment:

Working...
X