pcb-lorens-5

[bernte_one]

hello mr. Iran

is it necessary to steal german Invention?
if you are good in electronics it would be easy for you to design your own detector or improve the existing designs published in this Forum here
as i know Lorenz has protected all their detectors against copying you will never find out the correct part characteristics

i have seen a open lorenz x5, no Chance to remoce some of thes epoxi from the pcb without detroying the parts
and also the Software is protected

[mee60]

hi all
im mohamad and im perfect electronic men in www.irantk.ir (metal detector forums) please see this site
my id is mee
please send lorenz pulse 5 information for mee (( [email protected]))
tanks all

[external9]

You are very, very angry kt315 !! But do not know where you angry questions

[kt315]

THANK YOU KT315 for answer .please send me part number Preamplifier and ic D AND C 14 pin lorenz lp5 .
.I built this detector But the DISC channel Does not work please help me.very very thank you

AMIR MUHAMADY, I ASK ALL PEOPLE AGAIN AGAIN AND AGAIN - SEND ME YOUR FILES THAT I HAVE NOT.
then and only then I will answer on your requests to me -!!!!!!!!!!!!
D and C D and C D and C D and CD and C D and C D and C D and CD and C D and C D and C D and CD and C D and C D and C D and C
D and C D and C D and C D and CD and C D and C D and C D and CD and C D and C D and C D and CD and C D and C D and C D and CD and C D and C D and C D and C
D and C D and C D and C D and CD and C D and C D and C D and CD and C D and C D and C D and CD and C D and C D and C D and CD and C D and C D and C D and CD and C D and C D and C D and C
NO INDIVIDUALLY RESPECT HERE.

[kt315]

hi Elc
here you ll find all on subject all archive http://www.geotech1.com/forums/showt...709#post200709

[elc]

Hi kt315

can you send the parts list and diagram [email protected]

[external9]

THANK YOU KT315 .please send me part number Preamplifier and ic D AND C 14 pin .very very thank you

[kt315]

IRFP460

[external9]

hi to all What is the number of the MOSFET Lorenz lp5?

[lonelyWOLF]

B and C for servo control ic s probably ca3040

sorry .. it sould be ca3140

[external9]

I tested the ic B and C But it did not work .Duty in chip reset in the detector .Not that it does not work But the forward voltage .videlicet



After reset Voltage increases.In your opinion, what chip can be non-ca3140 ?




Please help me

[external9]

Thank you very much lonelywolf

[Mrand]

This plate contains a lot errors. The analisis can lead on the stub track and cause frustration. There are no extraordinary solutions.

[lonelyWOLF]

it look like lm13700 also ic A-555, B and C for servo control ic s probably ca3040

[external9]

please help me what is the Number ic in the picture ?lay2_66.jpg