My Digital Pulse detector Delta Pulse 3

[Miata]

Hi,

today I finished my Delta Pulse 3. It was tricky without an english (or german) manual. Turkish is not my motherlanguage.

I made any little changes. T16 (BC557) seems to be in wrong direction (180°) on the PCB.
I substitute with BS250. I have no 74VHC4051, I use an ordinary 4051 also a 4094.
The transistor IRF740 gets very hot, I spend a cooling plate. The discrimination mode is very poor. Perhaps I made an error. The sensitivity is good. I can detect a 1 Euro coin about 21 cm with "factory settings".

Regards
Jürgen

[tjmlena]

I would like to build it, but at least I need english instructions

[alipcpmc]

Hex File

hi my Friends. sorry my english language not good.
I do not See Hex or Program File for PIC18F4520
Please Upload or Send to me. Thanks
I will test with similator and I will Survey.
I Will show to all Results. Thanks
My Mail [email protected] or [email protected]

[6666]

claudio1084 contact Pasha he will send you a pic with full hex
he only charges for postage and blank chip

[claudio1084]

excellent information

Hi,

I have developed a digital detector. I want to hear your opinion about my design. I will attach all of documets soon. I attached schema and some pictures.

Wideos

http://www.youtube.com/watch?v=MzFMEaGACpI&feature=player_embedded

http://www.youtube.com/watch?v=AaT0JrbUCkg&feature=player_embedded

http://www.youtube.com/watch?v=zLGcf__ZAbs&feature=player_embedded

http://www.youtube.com/watch?v=yPHmuJIPl70&feature=player_embedded

Link:http://www.teknolojiekibi.com/yeni/i...p?topic=3797.0

Not: You should member for see all document in this link.

excellent information thk.

please if someone can send me hex files pliiiiiissssssssss, thank you very much from Chile

my mail: [email protected]

[satdaveuk]

give up

I give up, pasha promised me hex files for this project to my private email address which is [email protected] and yet again did not recieve anything, maybe things are not as they appear to be on here, im moving on to the minipulse 3 it seems to be in order with hex files incl.

Regards

[Pasha]

Also,

I didn't understand that how can I use PM in this site. So I couldn't send reply to a lot of PM. Could you send me e-mail. My mail: teknolojiekibi@gmail.

Regards.

[Pasha]

Hi,

Thank you all,

I sent a pic with full hex to some different country on the last week. I didn't take any money for softwere. I took the money for only shipping cost and empty pic. Thank you all for understanding. Some people made this detector on the Turkey and I have made 5 detector until now. All detectors are working goodly. I have sent all detectors for only materials costs . I want to make a good sharing project. I doesn't want to make a commercial project. Because I am making a commercial project on the same time. But this project is not commercial. My commercial project have same circuit and different PCB (SMT).

Thank you all for understanding. I can send the pic with full hex to all country.

Regards.

[6666]

Investigator
you would probably be better off making your post in the delta pulse thread

see here

http://www.geotech1.com/forums/showthread.php?t=8003

[Investigator]

I made delta Pulse 2, but did not want to work. Hear the sounds and it fluctuates but is not sensitive to metal. When we go through the searching coil is no sound or no reaction. Send me a scheme by which I could make Delta Pulse will work with labels- integrated circuits and tranzistors ex.BC557 A or BC557C , I DO NOT WANT TO DETECTOR WITH LCD DISPLAY I WANT TO DELTA COMMON ANALOG PULSE METAL DETECTOR.Please send me corect shematic for delta my mail is [email protected] Thank you in advance.Investigator

[6666]

I can attach demo software.

Pasha has offered us some demo software,
could you attach it here please Pasha
thanks

If you want the full hex contact Pasha
He will post you a Pic,

[drifterall]

Hello to all!

Unfortunately Pasha is right....

All the magic is in hex file. If he make it public a lot of people will copy it for commercial purpose!

I also want the hex but i understand him. Also he has not problem to send the pic.

I hope that he will help us to make a very good detector!

About the coil: it has the same Ohm resistance and μΗ (uH) with delta pulse 2? if you have time tell me the differences!

PS: Sorry about my poor English!

[satdaveuk]

Hi
Can you email me the files then please including uptodate hex files.
My email is: [email protected]

Thanks in advance
Very greatful

Regards

[Pasha]

Hi All,

I wrote a document for building and testing. But, I couldn't write in English because of time. Also, I have ordered the fabrication PCB. I have attached full document the following links. I didn't attach softwere because of I don't want make a commercial project. Some people can use the hex file for commercial things. I can send to everyone a pic with full hex without money. I sent the pic with full hex to some people in turkey recently. If you think my opinion is wrong, please say me. If a lot people sends that my oppinion is not true, I can attach demo softwere. I think you can understand me. I do not want to use it for commercial purposes.

http://www.teknolojiekibi.com/yeni/index.php?topic=3797.140

http://www.teknolojiekibi.com/forumdepo/delta%20pulse%203%20montaj%20klavuzu.pdf

[satdaveuk]

Hi
Without the hex files this project is useless to us.... If you dont want to post or have not got them can you tell us please so we can move on to other projects.

Regards