My Digital Pulse detector Delta Pulse 3

[smity]

The author does not send files via email. So, do not ask and do not waste time bill of exchange.

[alipcpmc]

I need Hex File

Pasha
I have sent you an email, thanks for the update
please send me Hex File.
[email protected]
[email protected]
[email protected]
best regards

[brabra]

Frend Pasha im from Bulgaria send hex please [email protected] THANKS

[rocco_k]

my email is:rocco_kabv.bg

[rocco_k]

help

Dear Pasha can you send to me hex file on mail ''[email protected]"

[Pasha]

Hi All,

And sorry all. I haven't got enough time. So I couldn't reply to your massages.

tjmlena, brabra, mahditala could you send me an email. [email protected]. I am working on the V2. Delta Pulse 3 is builded by a lot of people in generally Turkey. And everyone is satisfied.

Also, we will make a contest about best Delta Pulse 3 box. We will give a professional handle as prizes for the contest. Please follow us.

http://www.teknolojiekibi.com/yeni/index.php?topic=3797.msg35129#new

[mahditala]

Dear Pasha can you send to me hex file on mail [email protected]

[mahditala]

please send file HEX delta pulse 3

[Pulse]

I want to make a good detector. could you advise this detector for good performance?

[tjmlena]

I would like to build this MD

Where can I buy the Kit and how much does it cost??

[brabra]

Dear Pasha can you send to me hex file on mail [email protected]

[earthope]

Hi,

Thank you all,

I sent a pic with full hex to some different country on the last week. I didn't take any money for softwere. I took the money for only shipping cost and empty pic. Thank you all for understanding. Some people made this detector on the Turkey and I have made 5 detector until now. All detectors are working goodly. I have sent all detectors for only materials costs . I want to make a good sharing project. I doesn't want to make a commercial project. Because I am making a commercial project on the same time. But this project is not commercial. My commercial project have same circuit and different PCB (SMT).

Thank you all for understanding. I can send the pic with full hex to all country.

Regards.

hi Pasha
i wonder if you can send me Project kit (PCB and PIC and the other parts) so that i build it here
if you can please send me email to [email protected]

[Pasha]

Hi All,

Sorry for late reply but I am very very busy. I haven't got enough time.

Miata, this is great work. But discrimination should be good. I think you couldn't make calibration. Calibration should be good. You can see some information on the my videos about discrimination. I attached links of last my videos. I attached a picture about calibration signal. You should see this signal form on the D6 7th pin.


For other friends, I can send pic that is programmed with full hex. I didn't want money. I need only shipping cost and cost of blank pic. I will develop this project with your comments. I want to make a great share project with all comments.

http://www.youtube.com/watch?v=sEJImhgvjQc&list=UUKin-9OEooBezp0X0P9HFGQ&index=1&feature=plcp

http://www.youtube.com/watch?v=qe8e8u7Wxd8&list=UUKin-9OEooBezp0X0P9HFGQ&index=2&feature=plcp

[volcano]

thank you MR PASHA
I think that it is a good project . please send me the HEX file

[email protected]

[pigeon]

Hi,

today I finished my Delta Pulse 3. It was tricky without an english (or german) manual. Turkish is not my motherlanguage.

I made any little changes. T16 (BC557) seems to be in wrong direction (180°) on the PCB.
I substitute with BS250. I have no 74VHC4051, I use an ordinary 4051 also a 4094.
The transistor IRF740 gets very hot, I spend a cooling plate. The discrimination mode is very poor. Perhaps I made an error. The sensitivity is good. I can detect a 1 Euro coin about 21 cm with "factory settings".

Regards
Jürgen

HI MIATA

GOOD WORKS

BEST REGARDS