Tesoro Tejon

[daverave]

thanks for that

[Altair]

Other Lobo schematic and PCB I have found:

http://radiostudentmd.ru/english/articles.php?id=162

[daverave]

ok thanks

[CDI]

Hi CDI...would you have the link for lobo M on russian forum...and also does it have the vco audio or just single tone ????

It's on this page, also there is several video's about the same device.
If i understand good, coil for Tejon can be adapted here.
Not sure about VCO mod.

http://www.md4u.ru/viewtopic.php?f=25&t=2681&start=2525

[daverave]

Hi CDI...would you have the link for lobo M on russian forum...and also does it have the vco audio or just single tone ????

[daverave]

ok thanks CDI

[CDI]

was there ever a true working schematic done of the tejon without any pic controller ??? did lobo also have a pic controller ???

You can find Lobo M on the last page's on russian forum, complete pcb and schematic. Pcb is drawn in smd. Version is without PIC.

[daverave]

was there ever a true working schematic done of the tejon without any pic controller ??? did lobo also have a pic controller ???

[württemberger]

Thanks for the postet pictures !

I have all postet pictures from the russian Board... but there is no schematic with the PIC Controller.
This schematic pictures is from a "analog rebuild schematic" ... At the Pictures from the PCB is not possible
to see, the connection from the PIC Controller to the other Parts.

I need the complete orig. Tejon schematic to make my own PCB. The PCB from the russian Board is wrong and not complete !

[kt315]

..........

[kt315]

...................

[kt315]

nc

[württemberger]

Have nobody a complete Tejon Schematic with PIC Controller?

[württemberger]

you may find PCB in RAR here http://www.md4u.ru/viewtopic.php?f=25&t=3056&start=250
vlaser makes...

PCB is wrong... Missing connections, and a few other connections are wrong !

Another problem, i can´t find a complet schematic with the PIC Controller

[ivconic]

you may find PCB in RAR here http://www.md4u.ru/viewtopic.php?f=25&t=3056&start=250
vlaser makes...

PCB is not complete, missing some connections.