Nexus Standard SE

[mschmahl]

Today i had a chance to go on an archeological excavation and search with the nexus in prospecting stripes. Such a strip is around 2-3 m wide and 50-70 cm deep unearthed.I also try the Lobo St with Mod (GB in Disc) and the explorer SE. Only the nexus could handle the changing ground conditions (herd provide, post holes, trash pits, from sandy to loamy,...) and give a noticeable signal. The other detectors gave for every groundchange a "dig me" signal. The nexus have it done similar but very weak. If there was an object than it came a very strong signal. Only the disc was lacking, but this is no problem. In this depht you dig all what give a "beep".

[mschmahl]

I had the chance to get a used Nexus Standard SE with the double 9" and a double 6" coil. I like to try different technologies so i done the deal.
First tests of the nexus are very impressive. So it is my first "see through iron" VLF machine.
I have done a short video. The silver coin is a 1 oz .999 fine silver. The iron-pice is 7x2.5 cm.
http://http://youtu.be/Ya5uH3jYUeg

I´m new with the nexus and have not found a lot for handling and so on on the internet. So feel free to post experiences, tips and settings for this detector.
I have found some coins, buttons and musket balls on the first outdoor test with the 2x9"coil. And it is very sensitiv for small pieces too.
One musket ball was together with a nail in a lump of dirt.