QUASAR AVR SMD version build

[Bayu]

Quasar-F3? on this site https://fandy.ucoz.org/publ/metalloi...sar_f3/2-1-0-8

hi kt315, can the quasar arm use coil goldfinder sniper dia11cm TX=760uH and RX=8800uH, when I plug it in it can detect but the 2gram gold ring is only 5cm away, is there a solution? please help

[Bayu]

Thankyou

[kt315]

hello master i got a quasar arm pcb from my friend but i don't have the quasar file,schema and data, can you help me to get it all?  Thank you very much

Quasar-F3? on this site https://fandy.ucoz.org/publ/metalloi...sar_f3/2-1-0-8

[kt315]

https://reibert.info/threads/plata-kvazar-arm-quasar-arm-fm-regulirovka-toka.841906/page-2

price for board 7usd
uchip programmed 6usd

[ripsdevala]

One more thing, im not use resonance capacitor in the coil, when i use it, the deep is very low.... Im not sure why

[ripsdevala]

Im usig 3S ballancing, its already ok now, i drill the epoxy and do a tuning, but with concentric i only got 25cm

[reptooyep]

Repto, any progress?

I was make it work in the bench with 12v accu batt, but when i use 3s 3 x li-ion battery, the ballance is gone and the device is useless, what is this???

Hi,
I've not been there for a while.
If you tune the detector on the bench and then, you put it in case with a different supply, it won't work.
You should tune it with the final assembly.
Do you use a ballance board for your lithium battery ?
If no, you should think using one.
My unit still gets hot on TX circuit. I'm bored troubleshooting it so, i do other things for some days.

[ripsdevala]

At last, someone with interest

http://fandy.hut2.ru/Quasar/Quasar.pdf

I use dip version though.

[Spyke]

@ ripsdevala
can you post the link for shematic?

Thanks
Marc

[ripsdevala]

Repto, any progress?

I was make it work in the bench with 12v accu batt, but when i use 3s 3 x li-ion battery, the ballance is gone and the device is useless, what is this???

[Leaud]

I know this page but what I want to find, is the documentation that is show in this video.

https://www.youtube.com/watch?v=HCq3m1dPfOA

thanks

[kt315]

look a page of Andy

http://fandy.ucoz.org/publ/metalloiskatel_quot_kvazar_quot_quot_quasar_quot/metalloiskatel_quot_quasar_arm_quot/2-1-0-5

[Leaud]

Hi,
Can you explain to me how to build the coil for this detector and if you had technical documents for it.
Thanks

[ripsdevala]

Looking forward, i still need asking many thing, although its have good result in the air

[reptooyep]

Hi,
I'll be back home in a month. Still gets hot on tx circuit.
I tryed with different diodes, still the same and i've checked the schematic a billion times.
I bought smd AVR version board