Selection of the TX cascade driver

[JoyJo]

Why complicate it, the XP Deus FMF coil has an H-Bridge connected via 10R resistors directly to the GPIO on the processor and the detector works great.

Aren't the resistors shunted by diodes?

[Marchel]

Aren't the resistors shunted by diodes?

No there are no diodes there are only resistors that go directly to the GPIO. In Deuse 1 X35 coils only 10pf capacitors are added after the resistors.

[JoyJo]

And you didn't measure the parameters of the RX and TX coils?

[Marchel]

And you didn't measure the parameters of the RX and TX coils?

Yes, I have measured all the coil parameters and signal waveforms on the ADC and TX.