VERY SIMPLE PI METALDETECTOR

[Unregistered]

I have made with succeeding the delta pulse and works very well.
I want to make an other pulse much easy one to assemble for a my firiend.
Please help me and post here same easy schematics or BCB proiect.
No stuart1 ee trasure hunter, don't work well
please very very simple
thanks

[DIRCEU]

I have made with succeeding the delta pulse and works very well.
I want to make an other pulse much easy one to assemble for a my firiend.
Please help me and post here same easy schematics or BCB proiect.
No stuart1 ee trasure hunter, don't work well
please very very simple
thanks

Hi! unregister

Go to this site and please register.

http://hobidetektori.own0.com/index.htm

Regards

DIRCEU

[Geo]

Go to Gary's site and construct his PI detector.

[1843]

Go to Gary's site and construct his PI detector.

Hi Geo,
Have you built it? Although its detection depth is low, works very stable!

Best regards,
1843

[Geo]

I tried once and it is a good detector. As everyone understand a very simple detector it is not the best (most sensitive.. stable etc). It is a simple sample PI.

[Unregistered]

I tried once and it is a good detector. As everyone understand a very simple detector it is not the best (most sensitive.. stable etc). It is a simple sample PI.

i see gary's site, same electronics components very difficoult to find in italy like REG-1117A-adj, LT1054-CN8 and others, very confusion 1 or 2 coil in the site for me. I say very very very simple PI metaldetector.

[amtech2005]

VERY SIMPLE PI METAL DETECTOR

HERE IS ONE FROM THE GEOTECH ARCHIVE !!!! This Detector Works OK and is pulse induction.But I am searching for one that is older ,simple and might be better than this one !!!. If I find the one that I am thinking of , I will post it later . Also it is still the week-end , so tommorrow/next week you might get a bunch of responses !!!!!!!!!!................Eugene

[Geo]

HERE IS ONE FROM THE GEOTECH ARCHIVE !!!! This Detector Works OK and is pulse induction.But I am searching for one that is older ,simple and might be better than this one !!!. If I find the one that I am thinking of , I will post it later . Also it is still the week-end , so tommorrow/next week you might get a bunch of responses !!!!!!!!!!................Eugene

Hi eugene. It is 95% the same chematic.
There are a lot of the same schematics with only modyfications at the power suply!!!
Regards

[Geo]

Also you can make it.....

[Sean_Goddard]

What about the Whites Surfmaster PI? That's a great machine and VERY simple to build .

[amtech2005]

VERY SIMPLE PI METAL DETECTOR

GEO ,You right 2 times !!!!! 1. About the proscan and ...2. The schematic from Sevzirfo is the best one , so far !!!......I will stop searching and take a Break !!!!! ...Bye for now......Eugene

[Geo]

What about the Whites Surfmaster PI? That's a great machine and VERY simple to build .

You have right but i have not pcb for Surfmaster.
I am sure that if the unregister will looking for at the russian sites he will find pcb for the Sevzirfo's PI detector.

[Unregistered]

thanks
I have found the tiny, seems much easy one to make me, the electronic members are easy to find. Me study the circuit and I begin the assembly well.
Excuse my english

[Geo]

thanks
I have found the tiny, seems much easy one to make me, the electronic members are easy to find. Me study the circuit and I begin the assembly well.
Excuse my english

Good luck

[DIRCEU]

You have right but i have not pcb for Surfmaster.
I am sure that if the unregister will looking for at the russian sites he will find pcb for the Sevzirfo's PI detector.

Hi! GEO

EROLUNALL have the PCB for surfmaster.

Regards

DIRCEU