King Cobra PCB

[Legaucho]

wow! nice work . I see C41 and D5 are not in polarity, turn them over.

You are right, big mistake . I don't check my job that is no good...................

[kt315]

wow! nice work . I see C41 and D5 are not in polarity, turn them over.

[Legaucho]

Hello kt315,

Some news from me, I'm waiting for some components, I realize the front and back panel of the King Cobra box.
Kind regards

[kt315]

Legaucho, you are welcome.

same for NOTCH switch.

[Legaucho]

Thanks again, kt315

[kt315]

MODE switch. I did specially color wire accordance with marking at the schematic

[kt315]

DISC.ADJ. and NOTCH ADJ. pots are marked A100K - logarithmic taper.

[kt315]

You are Welcome. Future boards will be same you see in attach. Good luck. GMT_king_cobra .pdf

[Legaucho]

Hi kt315
Thank you again for all the information very useful. great guy

[kt315]

front panel in HD resolution, may be useful for your re-design. 3,3mb.
http://www.avral.ru/9b906299719b936218ec8e630578acee

[kt315]

take attention what markings on the schematic mean. this pic illustrates this.

[Legaucho]

You are right kt315, The type is Linear.

Kind regards

[kt315]

hello Legaucho,

thinking it is linear.

good luck

[Legaucho]

Hi kt315,

One question concerning the SENS potentiometer with switch, is it LOG or LIN potentiometer?

Many thanks by advance

[kt315]

Hi Jürgen, thank you lots for the support of my work. I hope you will speedy get the PCBs.

Good luck