King Cobra PCB

[Legaucho]

I receive today from kt315 the King Cobra PCB. Super quality. Many thanks

[Rivers rat]

Yes me too i really wanna see the result..........good job to you guys!!!!!!!!!!!!!!!!!i managed to get a 4" brand new gold moutain coil 3 weeks ago


RR

[danev]

I also really want to know the result of the experiment. Many thanks KT315, RelicHunter88, eduardo1979 and other participants of this interesting experiment. Thank you for your good work! I wish you good luck!

[Legaucho]

Many thanks KT315, I will informed you when the parcel was at home.

All the best

[kt315]

hello Luc,

Thank you for your real support of my work. The parcel is on a way to you, I will track it too and inform you as soon as it will touch the France land.
A tracking number is RN525045275LT.

All the best

[eduardo1979]

That's right!

[RelicHunter88]

Take your time Eduardo.
Of course we want to see this detector finished tomorrow, but we can wait a few days.
It is reasonable to take your time and do good work than to make something fast that will end up with bad results.

[eduardo1979]

Thanks, will be interesting if you can do some field tests to see what depths your getting in the ground and how reliable the two tones are at such depths.

Regards
Dave

I will try next week to make a video of this detector tests in air. So far I have not the detector coil mounted and also not with the above resin. Whenever I get time, I'll finish it and I'll try to take the field for good.

[satdaveuk]

I used TGSL coil and it works perfectly. This detector really like NOCH system that is very accurate. The dual tone is also very nice. The depth in the air is not much, are 35cm for € 1 coin. The beauty of this is that if the detector NOCH system is off, the detector continues to operate with 2-tone system. For now I will do more tests and then I will find a metal box to put the PCB. The coil is still in the air, I have not attached with resin. Later I'll post more about this detector. When I have time I'll make a video too.

Thanks, will be interesting if you can do some field tests to see what depths your getting in the ground and how reliable the two tones are at such depths.

Regards
Dave

[eduardo1979]

I will have to wait until start working on mine... I am jealous...

Eduardo, are you going to build a coil for this detector?
I would like more info about what you are planning for this detector.

I used TGSL coil and it works perfectly. This detector really like NOCH system that is very accurate. The dual tone is also very nice. The depth in the air is not much, are 35cm for € 1 coin. The beauty of this is that if the detector NOCH system is off, the detector continues to operate with 2-tone system. For now I will do more tests and then I will find a metal box to put the PCB. The coil is still in the air, I have not attached with resin. Later I'll post more about this detector. When I have time I'll make a video too.

[RelicHunter88]

I will have to wait until start working on mine... I am jealous...

Eduardo, are you going to build a coil for this detector?
I would like more info about what you are planning for this detector.

[eduardo1979]

Eduardo, good news and my congratulations! You have made it first working

Had promised that this weekend is going to resurrect the King Cobra.

[jap]

Hi kt315
A big thanks to you who work this easing to complete.
best time
j.

[kt315]

Eduardo, good news and my congratulations! You have made it first working

[kt315]

Congratulations! Where can i find the full part list?

Part List