IDX-PRO+VDI

[holyuser]

Holyuser were you able to flash the pic with data yet? Ive worked with earlier PICs but not this one.

I use my selfmade EPIC-programmer with MeLabs beta software:

http://melabs.com/support/progsoft.htm

It works from PIC10 up to dsPIC's.

[ivconic]

Eduardo, I got my boards burned, but I havent yet got the parts. Wow see how this project came alive??? n maybe the coil could be a problem like IGSL musketeer. The specs looks kind of similar to me... but iweel worth further investigation , possibly for an interface with IGSL with original coil which we know works great!!! I think the freq. is about 6.5 KHZ. TX

Why problem?
You can always buy original coil for Musketeer, or in this case; coil for White's Classic..
Plenty of those on ebay..

[Wiltran]

IDX

TX wire from 0.70 to 35 laps - 0.587 mH - within 1 mF capacitor
RX wire from 0.15 to 270 laps - 35.6 mH - 0033 mF condenser inside

DD type Coil? what size?

[Wiltran]

IDX

Holyuser were you able to flash the pic with data yet? Ive worked with earlier PICs but not this one.

[Wiltran]

IDX

Eduardo, I got my boards burned, but I havent yet got the parts. Wow see how this project came alive??? n maybe the coil could be a problem like IGSL musketeer. The specs looks kind of similar to me... but iweel worth further investigation , possibly for an interface with IGSL with original coil which we know works great!!! I think the freq. is about 6.5 KHZ. TX

[eduardo1979]

Sorry. What he said in the previous post was that he felt the poor quality of the images I posted, but at the moment is there and when I finish the project I will post a video with the results. Greetings.

[holyuser]

Lo siento por las imagenes borrosas,pero de momento el lo que hay. Cuando voy a terminar el proyecto,voy a publicar un video aqui de los resuldados.

Sory, but I do not understand.

[Qiaozhi]

Lo siento por las imagenes borrosas,pero de momento el lo que hay. Cuando voy a terminar el proyecto,voy a publicar un video aqui de los resuldados.

Please post in English, or at least provide a translation.

http://www.geotech1.com/forums/showthread.php?t=10526

[eduardo1979]

Lo siento por las imagenes borrosas,pero de momento el lo que hay. Cuando voy a terminar el proyecto,voy a publicar un video aqui de los resuldados.

[holyuser]

Let we see the prototype of the VDI-calculator PCB:

[mikebg]

Eduardo, what means your razz emoticon ?
May be it means that participants in this forum see your blur images and can't sharpen them. We are not for razz!

[eduardo1979]

IDX-PRO

[eduardo1979]

IDX-PRO

PCB ready. I need to do the coil and the PCB VDI.

[eduardo1979]

TX wire from 0.70 to 35 laps - 0.587 mH - within 1 mF capacitor
RX wire from 0.15 to 270 laps - 35.6 mH - 0033 mF condenser inside

[Wiltran]

IDX

Does anyone have any info on the coil of this? TX inductance, RX inductance, Freq etc. Thanks Eduardo for the great project info.