IDX-PRO+VDI

[eduardo1979]

IDX-PRO+VDI FINAL

Hello! After many hours of work have brought together all parts of the IDX-PRO. The project is 100% correct, both the metal detector, and the VDI. No errors, everything is checked thoroughly. Tomorrow I will start making the PCB-S. Enjoy the new project. Greetings to all. Eduardo.

[eduardo1979]

VDI-IDX-PRO

[eduardo1979]

Yeees. Tnks

[ivconic]

Maybe like this?
No need all traces to be 0.8mm.

[eduardo1979]

IDX-PRO

[eduardo1979]

Ivconic Thanks!. True, R27 is a bit misplaced, because it had no place to get more clues. SMD R27 may be no problem.

[ivconic]

Excellent job!
Although R27 could be placed a bit more "happier"!
I am guessing it was planned to be SMT?

[eduardo1979]

IDX-PRO

Hello! All right, completely revised. Here I leave the edited file and guaranteed 100%. Shortly I will post the PCB of the VDI. Enjoy everyone.

[Wiltran]

VDI

I'm going to try to adapt VDI TGSL to see if it works.

Coolest project!

[eduardo1979]

I'm going to try to adapt VDI TGSL to see if it works.

[Jose]

Hello Eduardo
Thanks for putting this project in the forum, is especially interesting presentation LCD. At first sight (the presentation LCD), it seems that can be adapted to other existing projects.
I'll see if I get the components in my country.
regards

[eduardo1979]

http://www.youtube.com/watch?v=oSA9ywMrZWc&feature=youtu.be

[eduardo1979]

Hello. I found this Russian forum of IDX-PRO PCB. The PCB had many mistakes and failures of some components. I corrected the PCB and added the missing components. I wish that we all take a look and give a chance on this project. Surely here in the forum there are people who would be interested in this project. I've also found the VDI file with all documentation. Please advise if there is any error in the PCB. I'll put here a video of this VDI I found on Youtube. Thanks for reading. Eduardo.