IDX-PRO+VDI

[eduardo1979]

No.

[tekin_efe]

1€ coin 35cm.

Do you have a chance to be a great show video capture

[eduardo1979]

1€ coin 35cm.

[tekin_efe]

TX=1,7 ohms=0,59mH
RX=90,4 ohms=34mH

thanks eduardo. Have six videos shot in the field of soil I'm very curious about the power under the ground shot.

[eduardo1979]

hi eduardo ,

rx .tx henry ? and ohm ?

TX=1,7 ohms=0,59mH
RX=90,4 ohms=34mH

[tekin_efe]

You have to make another coil for IDX.
Of TGSL does not apply to this unit.
The inductances are very different.
My coil DD27cm:
RX = 260 turns, 0.20 wire more parallel capacitor 47nF
TX = 34 turns, 0.60 wire more 1uF capacitor in parallel.
They are the best results achieved so far.

hi eduardo ,

rx .tx henry ? and ohm ?

[eduardo1979]

I actually hope for a better functioning mode of 2 tones of idx

At the moment very difficult. The solution would be the Arduino.

[ashefr10]

I really feel the same. So you do not pass so you have to build the IGSL. The TGSL has separate channels for the balance of ground. Ferrous and non ferrous.

I actually hope for a better functioning mode of 2 tones of idx

[eduardo1979]

I really feel the same. So you do not pass so you have to build the IGSL. The TGSL has separate channels for the balance of ground. Ferrous and non ferrous.

[ashefr10]

I can no longer set a geb effect on my tgsl since I put the card 2 tones . why ?

[eduardo1979]

34 Turns.

[ashefr10]

You have to make another coil for IDX.
Of TGSL does not apply to this unit.
The inductances are very different.
My coil DD27cm:
RX = 260 turns, 0.20 wire more parallel capacitor 47nF
TX = 34vueltas, 0.60 wire more 1uF capacitor in parallel.
They are the best results achieved so far.

34 vueltas for TX ??


34 turns ?

[eduardo1979]

HELLO, now that I finished my tgsl with 2 tones, I launched into the idx pro with 2 tones to see the difference. I wonder if I can use my coil tgsl for testing? or if we must rebuild a coil are what I can do a DD and what would be the values for a number of turns DC 20 cm?
what is the optimal coil, concentric or DD?

You have to make another coil for IDX.
Of TGSL does not apply to this unit.
The inductances are very different.
My coil DD27cm:
RX = 260 turns, 0.20 wire more parallel capacitor 47nF
TX = 34 turns, 0.60 wire more 1uF capacitor in parallel.
They are the best results achieved so far.

[eduardo1979]

My detector tuning
Search coils DD27cm

http://www.youtube.com/watch?v=ouaX_vIW3JM&feature=youtu.be

[ashefr10]

coil DD 20 cm for idx or concentric and values ?

HELLO, now that I finished my tgsl with 2 tones, I launched into the idx pro with 2 tones to see the difference. I wonder if I can use my coil tgsl for testing? or if we must rebuild a coil are what I can do a DD and what would be the values for a number of turns DC 20 cm?
what is the optimal coil, concentric or DD?