IDX-PRO+VDI

[mikipn]

Sorry, though I will disappoint you, you cannot remove these in no manner.

Never say never

http://www.youtube.com/watch?v=d-JH8PQaEWc&feature=mfu_in_order&list=UL

Happy New Year 2012

[eduardo1979]

happy new year to you all
many many thanks for this great site and your work. great projects, especially this one. I would love to build these detector. I am electrician with basic knowledge and a lot of soldering experience. I've already built the hammerhead and now it is time to deal with something new. I must first see if I get any parts, then I will build a pic burner.
I hope you will support me if I have problems ....

what alternative is there for the LM2930-8V?

sorry for the bad english ....

Many greetings and best for the new year, marc

LM2930(8V)=LM7808. Happy new year.

[Schatztaucher]

happy new year to you all
many many thanks for this great site and your work. great projects, especially this one. I would love to build these detector. I am electrician with basic knowledge and a lot of soldering experience. I've already built the hammerhead and now it is time to deal with something new. I must first see if I get any parts, then I will build a pic burner.
I hope you will support me if I have problems ....

what alternative is there for the LM2930-8V?

sorry for the bad english ....

Many greetings and best for the new year, marc

[szucs_g]

No offense. Worked for an obstetrician at the hospital. It was the same last name. :-)

[szucs_g]

elbombaci

would you mind explaining the connections to the encoder thanks

In Hungary, 24-step encoder can be taken. Previously, I wrote in the web shop are available. There are push-button, which should be here. There will be no problem if you do not pass 20 of the encoder?

[jack_hunter1972]

thank you very much for your reply MR Orbit ;my dear friend as far as i can see , there is no mentioning of feed back loop in the post witch MR ivconic has made, can you please tell me more about that and the way it can be connected to IDX and if possible tell me about winding directions of the tree coil and placement of feed back coil (if possible graphically) i apologize for troubling you in advance.

[6666]

elbombaci

would you mind explaining the connections to the encoder thanks

[holyuser]

I don't know its type.

I tell You, my friend, the type is ED1112S-20.

http://home.comet.bg/datasheets/Buttons/ED1112S-ok.pdf

[der_fisherman]

Hi

I used this rotary encoder pot:

http://i1226.photobucket.com/albums/ee416/Uykusuz34/DSCI0064.jpg

I don't know its type. Rotary encoder pots are not linear or log. Rotary encoder pots generate clock pulse.

http://www.google.com.tr/search?pq=rotary+pot&hl=tr&sugexp=ppwc&cp=10&gs_id=h&xhr=t&q=rotary+potentiometer&gs_sm=&gs_upl=&bav=on.2,or.r_gc.r_pw.,cf.osb&biw=1280&bih=649&bs=1&um=1&ie=UTF-8&tbm=isch&source=og&sa=N&tab=wi&ei=3KP4TqmjNKLj4QTdv8yNCA#um=1&hl=tr&tbm=isch&sa=1&q=rotary+encoder&pbx=1&oq=rotary+encoder&aq=f&aqi=g1g-S3&aql=&gs_sm=e&gs_upl=24188l24772l0l25072l4l4l0l0l0l2l250l817l0.2.2l4l0&bav=on.2,or.r_gc.r_pw.,cf.osb&fp=f1c2bf2749f88ab5&biw=1280&bih=685

I am using rotary encoder pots on my other projects.
http://www.lugatek.com/forum/index.p...sg1216#msg1216 (This project is LPG level indicator.)

Rotary encoders are not pots. But they can be used to encode a resistance when correctly used with other components.
As the word encoder was not previously mentioned, it was difficult to help.
Now its cleared up properly.
Andy

[Uykusuz]

Hi

I used this rotary encoder pot:

http://i1226.photobucket.com/albums/ee416/Uykusuz34/DSCI0064.jpg

I don't know its type. Rotary encoder pots are not linear or log. Rotary encoder pots generate clock pulse.

http://www.google.com.tr/search?pq=rotary+pot&hl=tr&sugexp=ppwc&cp=10&gs_id=h&xhr=t&q=rotary+potentiometer&gs_sm=&gs_upl=&bav=on.2,or.r_gc.r_pw.,cf.osb&biw=1280&bih=649&bs=1&um=1&ie=UTF-8&tbm=isch&source=og&sa=N&tab=wi&ei=3KP4TqmjNKLj4QTdv8yNCA#um=1&hl=tr&tbm=isch&sa=1&q=rotary+encoder&pbx=1&oq=rotary+encoder&aq=f&aqi=g1g-S3&aql=&gs_sm=e&gs_upl=24188l24772l0l25072l4l4l0l0l0l2l250l817l0.2.2l4l0&bav=on.2,or.r_gc.r_pw.,cf.osb&fp=f1c2bf2749f88ab5&biw=1280&bih=685

I am using rotary encoder pots on my other projects.
http://www.lugatek.com/forum/index.p...sg1216#msg1216 (This project is LPG level indicator.)

[der_fisherman]

Sorry! I didn't see You question...

.......As against a slider pot?

What is also important to know is Log or Linear versions......

Regards

Andy

[szucs_g]

What is type of "POT1 ROTARY_POT"?

Hannu

Sorry! I didn't see You question...

[szucs_g]

Hi to all
My new project completed. Its name DM-1. (Discrimination Module)

Click to this link for DM-1:

http://www.lugatek.com/forum/index.php?topic=217.0

For video:

http://www.youtube.com/watch?v=u6SoCvBTjV4

I attached all documents here.. But You follow lugatek forums for updates.

Best Regards.

These are correct. But... What type of rotary_pot must I buy? :-)

[Hannu]

Hi to all
My new project completed. Its name DM-1. (Discrimination Module)
Click to this link for DM-1:

http://www.lugatek.com/forum/index.php?topic=217.0

What is type of "POT1 ROTARY_POT"?

Hannu

[Orbit]

Data for the concentric :

capacitors rx 33nf !
capacitors tx 1mf !

enjoy !!