IDX-PRO+VDI

[steaua581]

I am a bit confused...wich one is the right schematic?..i"ve seen few mods..Is there an oscilograme..
Thanks
Marius

[silverdog]

Thanks for the first couple of orders guys, give me a couple of days to get them out

I started mine last night and found the partslist needs work !!
I made the partslist from the schematic, not realising there were so many changes
I'll hopefully correct it tonight and can then put some kits together

This is just the IDX pro Kits, VDI kits will go out as normal

Silverdog

[eduardo1979]

[der_fisherman]

Ok Boards have arrived for the IDX to go with the VDI units added last week

I must stress at this stage everything is untested by me - I will add the pcb and kits to my shop as people have been asking for these for a while
Please understand there may be minor problems which could include missing components, or extra components supplied

I am trying to pull together some documentation but as with most other projects it is a bit sketchy

I have put together a partslist which I will use initially and will be building a unit from it as soon as I can to verify its accuracy

I will be trying to supply original components i.e. Lmc6484, Bc237
The partslist shows some alternatives

Thanks again to Eduardo and Holyuser for their great work

My personal compliments to all three of you for making this possible, many, many thanks.....

regards
Andy

[eduardo1979]

Good Job! Very nice!

[silverdog]

Ok Boards have arrived for the IDX to go with the VDI units added last week

I must stress at this stage everything is untested by me - I will add the pcb and kits to my shop as people have been asking for these for a while
Please understand there may be minor problems which could include missing components, or extra components supplied

I am trying to pull together some documentation but as with most other projects it is a bit sketchy

I have put together a partslist which I will use initially and will be building a unit from it as soon as I can to verify its accuracy

I will be trying to supply original components i.e. Lmc6484, Bc237
The partslist shows some alternatives

Thanks again to Eduardo and Holyuser for their great work

[eduardo1979]

Thanks Holyuser.You've done a good job for us all.We are grateful for their work.

[Sean_Goddard]

Okay, no problem!
Maybe some day in the future, when the conditions will be better.

Thanks Holyuser for your understanding. I still think you did a GREAT job on the VDI thing as a whole!

[Sean_Goddard]

I have, I was UK dealer until Evergreen paid £30,000 to take it way. Thing is I was going to let it go anyhow. The GM is a TERRIBLE machine! Odd VCO, poor iron disc, hard to ground balance, and VERY twitchy and flimsy build.

Sure it goes deep but what use is that when it falls apart or wont discriminate very well. Sorry NOT for me. I'll stick with my modified Tesoros and Whites.

These are MY opinions, and are NOT necessarily what other who have used thee machines will find. I'm only saying what I see. I have no axe to grind with the creator of the GM machines.

[Orbit]

http://www.youtube.com/user/BanditoGoldenMask

[Orbit]

http://www.garysdetecting.co.uk/ you have not heard of ggolden mask?

[holyuser]

BTW it was going to cost me £35 to send you that money. I'm happy to do it via PAYPAL, but no other way mate, just too expensive, sorry .

Okay, no problem!
Maybe some day in the future, when the conditions will be better.

[Wiltran]

Nice job Holyuser.

BTW it was going to cost me £35 to send you that money. I'm happy to do it via PAYPAL, but no other way mate, just too expensive, sorry .

Willtran, nice find mate and EXCELLENT job on building a top machine!!

Thanks Sean!

[Sean_Goddard]

Nice job Holyuser.

BTW it was going to cost me £35 to send you that money. I'm happy to do it via PAYPAL, but no other way mate, just too expensive, sorry .

Willtran, nice find mate and EXCELLENT job on building a top machine!!

[Wiltran]

You should drink less spirits, so as not to confuse with water, then Yuo will see where is air, and where is ground! We may be kidding but vhits idx in the country who has any other detector.

I am sorry orbit, I don't usually get involved in these pi$$ing contests but you call yourself as " GURU" what does that mean? Holyuser put the VDI hex on the site and members
didn't like actung minen, ok He changed lt. He then uploaded geotech hex. I loaded it on my board, went out and found a silver ring. The hexfile works great. It does'nt cost you anything.What is your problem?