Announcement

Collapse
No announcement yet.

IDX-PRO+VDI

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Jose
    replied
    Thanks Holiuser
    I will not need much work.
    I think that getting the PIC16F88 in my country is a matter of time.
    Best Regards

    Leave a comment:


  • WM6
    replied
    Originally posted by holyuser View Post
    VDI readings depend on the quality of the analog part is connected. If the characteristics of the two channels x,y (synchrodetectors, filter-amplifiers) are close enough, then the numbers of coins are similar in different orientation and distance, until the maximum distance of detection. Let us remember that VDI measured only what it receives from the analog circuits of the detector.
    Thank you holyuser!
    Did you test how different coil shape (CC, DD, OO ...) affected VDI readings? Which shape is more appropriate if we follow accurate VDI recognition?

    Leave a comment:


  • holyuser
    replied
    Hi, Jose!
    I could recompile the project to another PIC, but it will be possible when I have free time enough, moreover, would require hardware changes
    Regards!

    Leave a comment:


  • Jose
    replied
    Holiuser Thanks, I will try to get it.
    Jose

    Leave a comment:


  • holyuser
    replied
    Originally posted by Jose View Post
    Is possible replacement for the PIC16F88?
    Direct replacement without any changes can be PIC16LF88.

    Leave a comment:


  • Jose
    replied
    Hello Forum
    Is possible replacement for the PIC16F88?, Not available in my country.
    thanks
    Jose

    Leave a comment:


  • holyuser
    replied
    Originally posted by WM6 View Post
    How does VDI manage with rotating coin (mean with coin in different orientation regarding coil position)? Does it recognise coin with the same VDI number at the same max. VDI detecting distance with different coin orientation?
    VDI readings depend on the quality of the analog part is connected. If the characteristics of the two channels x,y (synchrodetectors, filter-amplifiers) are close enough, then the numbers of coins are similar in different orientation and distance, until the maximum distance of detection. Let us remember that VDI measured only what it receives from the analog circuits of the detector.

    Leave a comment:


  • holyuser
    replied
    Originally posted by WM6 View Post
    You have to recharge battery!
    There are still a lot of power into the battery while the empty battery starts blinking.

    Leave a comment:


  • WM6
    replied
    Originally posted by Qiaozhi View Post

    Easier than I thought!
    You have to recharge battery!

    Leave a comment:


  • Qiaozhi
    replied
    Originally posted by holyuser View Post
    4,4,4,31,4,4,4,4,_ ' CGRAM 0
    0,0,12,0,12,0,0,0,_ ' CGRAM 1

    P.S. The first two symbols are not for battery.
    And (of course) the first two symbols are the zero VDI marker, and the equals sign, in that order.

    Leave a comment:


  • Qiaozhi
    replied
    Easier than I thought!
    Attached Files

    Leave a comment:


  • WM6
    replied
    Originally posted by holyuser View Post

    Excellent work holyuser, congratulation!

    How does VDI manage with rotating coin (mean with coin in different orientation regarding coil position)? Does it recognise coin with the same VDI number at the same max. VDI detecting distance with different coin orientation?
    Attached Files

    Leave a comment:


  • Qiaozhi
    replied
    Originally posted by Altra View Post
    Qiaozhi,

    It's called a custom charactor. Here is one description.

    http://www.geocities.com/dinceraydin/lcd/custom.htm
    Originally posted by holyuser View Post
    I do not mind sharing.
    Using PIC-BASIC looks like this:
    '********************************
    DATA 'Define User Characters into EEPROM
    4,4,4,31,4,4,4,4,_ ' CGRAM 0
    0,0,12,0,12,0,0,0,_ ' CGRAM 1
    14,31,17,17,17,17,17,31,_ ' CGRAM 2
    14,31,17,17,17,17,31,31,_ ' CGRAM 3
    14,31,17,17,17,31,31,31,_ ' CGRAM 4
    14,31,17,17,31,31,31,31,_ ' CGRAM 5
    14,31,17,31,31,31,31,31,_ ' CGRAM 6
    14,31,31,31,31,31,31,31,_ ' CGRAM 7
    '
    '
    FOR i = 0 to 63 'Loading User Characters into CGRAM
    READ i,char
    LCDOUT char
    NEXT i
    '******************************
    P.S. The first two symbols are not for battery.
    Thanks Altra and Holyuser!
    Now it all becomes clear. It's time to go off and play.

    Leave a comment:


  • holyuser
    replied
    Originally posted by Qiaozhi View Post
    If you don't mind sharing ... how did you get that nice battery indicator symbol on the LCD display?
    I do not mind sharing.
    Using PIC-BASIC looks like this:
    '********************************
    DATA 'Define User Characters into EEPROM
    4,4,4,31,4,4,4,4,_ ' CGRAM 0
    0,0,12,0,12,0,0,0,_ ' CGRAM 1
    14,31,17,17,17,17,17,31,_ ' CGRAM 2
    14,31,17,17,17,17,31,31,_ ' CGRAM 3
    14,31,17,17,17,31,31,31,_ ' CGRAM 4
    14,31,17,17,31,31,31,31,_ ' CGRAM 5
    14,31,17,31,31,31,31,31,_ ' CGRAM 6
    14,31,31,31,31,31,31,31,_ ' CGRAM 7
    '
    '
    FOR i = 0 to 63 'Loading User Characters into CGRAM
    READ i,char
    LCDOUT char
    NEXT i
    '******************************
    P.S. The first two symbols are not for battery.

    Leave a comment:


  • Altra
    replied
    Qiaozhi,

    It's called a custom charactor. Here is one description.

    Latest news coverage, email, free stock quotes, live scores and video are just the beginning. Discover more every day at Yahoo!

    Leave a comment:

Working...
X