can @ 1m - thank you, opinion spammers!

[wallker]

@ wallker
Why the yugoslavian MD doesn't detect any gold?

I didn't say that it can't detect gold, just that is unsuitable for any "real" gold hunting. Reason for this is too big sensitivity and very bad delay adjustment (bad for gold detecting, but not for it's real purpose - mine detecting). The detector had just one knob named sensitivity (but i think it's delay adjustment), which when adjusted to detect gold make sounds on every 2 cm in soil. When sensitivity (delay) is set to eliminate ground effects it wont detect any gold, they could probably be modified but again they not designed for "our" purposes.

I don't like making a secret out of this great detector, you know
the culprit who agitates against my real good detectors without
any respect, personal experience and technical product details!

I don't have anything against your detector or against you. I think I know about what person you talking about and I doubt that he have something against you and your detectors, but maybe the way you fit in your posts - post something without any schematic or block diagram to verify all yours statements.

Regards Marko.

[johnandles]

Brains

Handing out Brains...good Idea !

[Funfinder]

I didn't say that it can't detect gold, just that is unsuitable for any "real" gold hunting. Reason for this is too big sensitivity and very bad delay adjustment (bad for gold detecting, but not for it's real purpose - mine detecting). The detector had just one knob named sensitivity (but i think it's delay adjustment), which when adjusted to detect gold make sounds on every 2 cm in soil. When sensitivity (delay) is set to eliminate ground effects it wont detect any gold, they could probably be modified but again they not designed for "our" purposes.



I don't have anything against your detector or against you. I think I know about what person you talking about and I doubt that he have something against you and your detectors, but maybe the way you fit in your posts - post something without any schematic or block diagram to verify all yours statements.

Regards Marko.

Delay timing would be relevant for Pulse Induction.
Including recovery speed.

In case of IB / TR the automatic ground exclusion calculates
the usual coil-movement-differences but this special MD
contains no motion circuit, but it makes the slightest ground
differences audible on very high sensitivity settings.

btw. even if I would like to provide detailed infos about
the circuit I couldn't because all the IC labels have
been removed already by default.

Schematics and block diagrams would be great but those
are not available for all detectors. I'm open to fair discussions
but not for making childish fun out of hitec MDs everyone with
a little bit of expertise can identify them as such. If a person
likes to compares a Ferrari with a scrap barrow he can do this
for his own fun but he should not wonder if someone no more
wants to discuss or presents further good cars to such person.

Enough is enough, I am not running the same gauntlet as
it was with the Jeohunter - just for the entertainment and
curiosity of some arrogant and everything doubting guys!

Not every person deserves any powerful information or can
handle it the right way. And some people think for free info
is so dirty cheap and worthless they can make fun out of it.

Next time they have to pay alot money for good information
so they will learn to respect true and hard earned knowledge.

Such persons finally destroy the good spirit and meaning of a
free and technical forum where all should support each others.

@ johnandles
I have enough brain, I could give kt315 a part of it
so there's no longer just a cord that holds his ears.

[Funfinder]

Mini-Screw detection movies

http://www.qooy.com/files/FAAJYQNF6E/miniscrews_detection_movies.rar

19MB . xvid . avi . 640x480 . 44sec / 34sec

The new test shows how unbelievable powerful this MD
with it's pretty large coil is for detecting super little stuff.

The test was made indoors with heavy frequented street
nearby including all kind of electronical devices and even
metal objects pretty close.

The cm/inch ruler 0.00 starts 0,5cm above coil level
and the video was shot from an angle of ca. 15° above.
To play fair this must be considered, but afterwards I
made the distance test without camera and the position
of the screws on the ruler is the real detection distance.

To get this distances under real search conditions the
target has to be within the ca. 33% inner area of the
coil and while slow sweeping.

Sensitivity was up to 10 but I have tested this setting
already outside - it is no problem to search at this high
level under real conditions.

btw. the both values 10.5cm and 16cm just represents
a clear and loud detection signal at a heavy e-smog location.
A skilled user could hear the detection starts already at a
distance of 50% more, especially without EM-pollution.

This detector is not for rookies but really a jewel in analog
metal detection. Sometimes it needs patience and pressing
the reset button 3-5 times until the critical adjustment is
set to the best position but you can find ultra little stuff
and ultra deep stuff at the same time what's extremly rare.

Perhaps sometimes I will lead really interested persons
on the right track so those have the chance to get this
super detector but I doubt that's possible without the
danger that unwanted guys also could "rob" this info.

btw. I have to make clear that I don't have the need
to "protect" or "let shine" all of the detectors I own
just because of the reason that I only have the
best detectors and such stuff. No way. If I bought
a detector and I see that it doesn't work very well
I also would tell anyone fair about the problems.

But I am seriously informed already before and have a
good flair to distinguish the real powerful ones from the
not so useful or deep ones. Just wanted to make this clear.

But of course I don't let evil opinion-spamers like WM6
throw dirt over dirt onto my detectors or onto my objective
informations! And now he pays the price - he must pay and
suffer so his poor soul may be purified in 20 or 100 years!



If someone has a scale at home that is able to measure
0.001 of a gram he could look around if he finds such
identical small screws and post the weight of them.

I guess it's around 0,1 gram for the ultra small one and
perhaps 0,3-0,4 grams for the very small one. Thanx.